CLS W219 Facelift LED Tail Lights modules
edit: is this just an upgrade bypass mod or would it fix/replace my OEM board? I have a failed reverse light.
Last edited by Dokuji; Jun 19, 2024 at 02:22 PM.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
Hello. I want to buy w219 facelift module, how can I reach you? My vehicle is 2008 model. I have faclift stops, but they are not suitable for my vehicle.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
désolé pour la réponse tardive :/
Un nouveau lot sera prêt le mois prochain,
j'enverrai un MP à chaque membre intéressé pour un
Je compte sur toi pour les modules quanf ils sont pret
Narek
Email: Khshtoyannarek@gmail.com
The Best of Mercedes & AMG
Last edited by Kingkell; Jun 29, 2024 at 05:10 PM.
Narek
Email: Khshtoyannarek@gmail.com
mail : Contact@ams-exclusive.com
Au plaisir,
gracias por tu mensaje. El último juego que tengo en stock está reservado por un miembro polaco hasta este fin de semana. Si no lo acepta, te lo diré.
Tengo que pedir piezas para otro lote, por lo que no estará disponible hasta fines del próximo mes.
Saludos,
Frenchy
[/QUOTE
do you still produce these modules? Unfortunately I cannot send you a private message yet
It would be nice if you could send me a message for details.Many thanks and greetings from Germany!
Are you still making modules?
I would like to purchase it.
Please send an email to dndb4001@naver.com.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
Mon email: luis_oliveira2@msn.com
Merci
Oliveira Luis
Mon email: luis_oliveira2@msn.com
Merci
Oliveira Luis
you’ve got mail

Cheers,
Frenchy

As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
Could you shoot me a message. My email is doordashss1013@gmail.com or on here as well
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
Could you shoot me a message. My email is doordashss1013@gmail.com or on here as well
Thanks @TheFrenchy
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !

http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
Hello,
I need a set of these Connectors for my c219.
Could you shoot me a message. My email is olihed70@gmail.com or on here as well
Thanks! @TheFrenchy
I need a set of these Connectors for my c219.
Could you shoot me a message. My email is olihed70@gmail.com or on here as well
Thanks! @TheFrenchy
thank you for your message.
i sent you a mail.
Cheers,
Frenchy



