CLS W219 Facelift LED Tail Lights modules
#151
For the folks in Europe that want these, I have a set including two tail lights available after selling my CLS. Only available as a complete set, would need to be shipped as two seperate packages due to size of the lights.
€400 + shipping.
PM if interested.
€400 + shipping.
PM if interested.
The following users liked this post:
MZ-M104 (06-05-2021)
#153
Newbie
Join Date: Jan 2020
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
-07 cls 320CDIˇˇ-04 W163 4.0d
#154
Hello,
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
kinggorey@gmail.com
#155
I'm interested in module
[QUOTE=TheFrenchy;4981062]Hello,
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
If you still make them in interested. EBONICK22@GMAIL.COM
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
If you still make them in interested. EBONICK22@GMAIL.COM
#157
2006 cls500 Til light upgrade module
Hello,
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
#158
CLS 350 W219 Led Modul
Last edited by Sossa; 08-23-2020 at 08:11 AM.
#159
Newbie
Join Date: Aug 2020
Location: Austell ga
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
w219 e64 e63 g37
Me also please
#163
Senior Member
=================
Just in case - fellas, what are the other reliable options?
PS: I wonder if US 2009+ tail lights have amber turn signals or red ones?
#164
Newbie
Join Date: Jan 2021
Location: North Carolina
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Cls55amg
Modules
Any chance you still have some modules for my w219. It’s a cls55amg
email fbencosme0310@gmail.com
thanks in advance
email fbencosme0310@gmail.com
thanks in advance
#165
Member
Thread Starter
Any chance you still have some modules for my w219. It’s a cls55amg
email fbencosme0310@gmail.com
thanks in advance
email fbencosme0310@gmail.com
thanks in advance
yes of course, I have made a new batch of 15 sets.
You 've got PM.
Happy New year to everyone
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
Regards,
Frenchy
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
#171
#172
#173
Newbie
Join Date: Aug 2021
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2005 Mercedes CLS 500 Lorinser
Tail lights modules
Hello,
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
As promised on anoter thread, i'm happy to
Show you the video of the first Plug & Play module,
that allows you to swap your old Tail lights for the
LED Tail lights from the 2009+ facelift model.
Every lights work perfectly without generating any error on
Your Instrument Cluster.
To upgrade your tail lights, you'll have to remove the plastic traverse in the trunk to Access all bolts, and bend a little bit side carpets.
Then, unscrew the 5 bolts of the Tail light, swap it with the new one, fix it with the 5 bolts, plug the module on your OEM connector (harness of the car), without cutting anything, and plug the other connector (from the module) to your new Tail light. Then you'll just have to attach the module on the traverse bar above the rear SAM, and that's it !
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
http://www.youtube.com/watch?v=pzZyJ...e_gdata_player
As you will see on the video, the sample is not completely finished, need to drill a hole In the box to run wires Safely out of it.
Everything will be ok on the finished product.
Regards,
Frenchy.
#174
#175
Member
Thread Starter
Hello,
thank you for your message, the last set I have in stock is reserved by a polish member till this weekend. If he doesn’t take it, I will tell you.
i have to order parts for another batch, so it won’t be available till end of next month.
cheers,
Frenchy
thank you for your message, the last set I have in stock is reserved by a polish member till this weekend. If he doesn’t take it, I will tell you.
i have to order parts for another batch, so it won’t be available till end of next month.
cheers,
Frenchy
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)