Resonators out - Xpipe in $120
Cut out the large center resonator
Replaced with Xpipe as far forward as it would go and then straight pipes out to the rear cars and mufflers.
Not a significant difference in sound but perfect for me. I can actually hear the car start with the doors closed and the growl/rumble is brilliant!
Pro Muffler
8615 W Kelton Ln, Peoria, AZ
(623) 876-9660 () · pro-muffler.com
Oh well, ended up finding another shop (excellent reviews) to take out my mufflers and put in some magnaflow's. I go in at 10 am today.
move your x pipe up a little when you do the exhaust.
Trending Topics
I've never made a YouTube video but tomorrow I'll try to make one and post a link to it on here of the sound.
The Best of Mercedes & AMG
I've never made a YouTube video but tomorrow I'll try to make one and post a link to it on here of the sound.
There is a little crackling noise when I first rev'd it but that is not there when accelerating.
I still say try it. It's cheap enough to where if the drone is too much you can spend a couple hundred bucks on some dynamat for the trunk (still be a lot less than a new cat back setup like 3k for meisterschaft) or put the mufflers back on and the whole "experiment" cost you 150 bucks.
Please read- the drone was SIGNIFICANTLY more with large stock resonator in place. When I swapped that out for the x-pipe, the drone was much more "pleasing" to the ear.
just confirming before I take this crap apart!
I took out 9 and put an X pipe there
And
Took out 10 (mufflers) and replaced with straight pipes out to the stock mercedes tips.
Here's what I suggest doing.......
Replace 9 with an X pipe.
Cut off mufflers (10)
***Don't weld on straight pipes in place of 10 yet. Start the car and rev it up. If it's too loud weld mufflers back on and just stay with x pipe mod and consider removing secondary cats for a little more sound.
If you like the sound without mufflers, move forward and have the shop bend/cut/weld up some pipe to put in place of removed muffler (#10)***
I took out 9 and put an X pipe there
And
Took out 10 (mufflers) and replaced with straight pipes out to the stock mercedes tips.
Here's what I suggest doing.......
Replace 9 with an X pipe.
Cut off mufflers (10)
***Don't weld on straight pipes in place of 10 yet. Start the car and rev it up. If it's too loud weld mufflers back on and just stay with x pipe mod and consider removing secondary cats for a little more sound.
If you like the sound without mufflers, move forward and have the shop bend/cut/weld up some pipe to put in place of removed muffler (#10)***






