Mode Carbon Product Showcase - Featured Item: AMG GT/GT S Edition 1 Wing
Add the missing touch to the rear end of your AMG with our all-new Edition 1 Wing. Modeled after the original equipment from Mercedes-Benz, our high grade carbon fiber will be sure to leave the impression that you sought after. Pictured here in both 100% carbon fiber and custom painted gloss black, both of which are available options.
Technology:
Our Mode Carbon AMG GTS Edition 1 Wing is manufactured to the highest standard of quality, using our Prepreg composite process. Prepreg is the common term for fabric reinforcement that has been pre-impregnated with a resin system. The resin system is an epoxy and already includes the proper curing agent. As a result, it's ready to lay into a mold without the addition of resin or the steps required of a typical hand lay-up. This yields near-perfect epoxy resin content, maximizing strength properties for the reinforcement
100% Carbon Fiber:
All raw materials used in our manufacturing are hand-picked from Germany, France and Japan to ensure that our carbon fiber products exceed even the most strict industry standard of quality.The carbon fiber is finished with UV protected clear coat to prevent discoloration from sun exposure. The glossy finish not only provides stunning aesthetics, but also serves to maximize the longevity of our products by increasing their durability to the elements.
The Result:
Our commitment to quality is high-grade carbon fiber that reduces weight, increases performance and improves aerodynamics. Whether your car is for the street or dedicated to track use, Mode Carbon products offer an ample blend of quality, refinement and style.
Installation Requirements:
- Deactivate the electronic wing
- Drill into your existing wing
- Professional installation
We have successfully sold, installed and tested our R8 GT Wing for the Gen 1 format and this requires for the electronic wing to be de-activated as well.
Trending Topics
The Best of Mercedes & AMG
PM on the way.
Last edited by Mode Carbon; Jul 30, 2018 at 02:24 PM.
Correct, a few 100 pounds of added down-force is a good guesstimate. Typically, this is what you gather from an R or GTS spec wing from factory.
PM on the way.
We were mandated to shut down our shipping department due to the zoning codes and social distancing practices over the course of Summer 2020.
While I was in the hospital we had about 50 items clearing up in the paint department that all got tarnished due to the non-communication policies at the hospital.
Almost 8 months later and I’m still trying recover from the accident. Receiving constant medical supervision and it has been hindering our ability to deliver.
We are doing our very best to get back up and running, but at this point I’m really just trying to hang in there mentally.
Thank you so much to those whom stood by us and we send out a heartfelt apology to all of those whom were affected by the aforementioned problems.
I would like to personally extend a 50% off voucher to all those that didn’t get their order and/or a $500 rebate card.












