emre952

Hello, i just wanted to share the facelift euro conversion of a AMG GT C from my Customer. The Car is a US Car which is now in Germany. The customer called me to do the Conversion. And here are the finished Photos. The car is fully converted to facelift head/taillights. The dynamic turn signal function is activated. No errors. Its not a plug and play job, you need to rewire and add cables. i have a friend in Maryland near Washington DC area where i can offer this conversion. PM me for details.


before and after


dynamic turn signals

Skilly

so cool! My car is in the shop right now (US car) getting the refreshed headlights updated to 2020 - just like this one. I have had the wiring done (it requires extra power and ground wires). Im stuck at the coding - could you put me in touch with the source that did the coding? I would gladly pay for the instructions on how this is done. my local MB shop has it and has been trying to figure out the QR code entry but they have been stuck.

Please PM me if you can help - really exciting to see this! Ive been looking and this is the first example that I have seen!!!

mbjj57

so the us tail light can be coded for the sequential turn signal..?

I am interested ...

UCIMBZ

No. You need hardware.

emre952

yeah you need the euro taillights. then a bit of rewiring and coding is needed

Skilly

OK...first and foremost BIG shout out to @emre952 for literally working into the next morning a couple of evenings to get this to work. The knowledge was astonishing to watch as he took over the laptop of and AMG Master Tech (17yrs) via Teamview and navigated the systems in the car to teach it to work with the updated lights. It was an international event between Germany and the US (California).

So, took a brand new set of facelift lights and through some minor wiring (just ground and power; not CANBUS) and deep knowledge of coding, I have a car with perfectly working 2020 lighting - no faults and everything works as expected. If you are interested in getting this done, work with him...he knows what he's doing and can solve this and many other coding options (like presets for S+ upon start, or disabling auto off).

If you are local in the NorCal area, I worked with Silicon Valley Garage on the other side of this - between the two of them it was pretty cool to watch the coordination. Both masters in their field.

mbjj57

looks good 😁

emre952

Thank you it feels nice to read positive feedback. If i can help in anything feel free to contact me

alvisescarpa

Hi guys! I’m Buying a Damaged Amg gts 2016 (front bumper hood and headlight, airbag are ok). So I must buy al front components. Reading this post I’m thinking to make Facelift conversion! Who can help me (I pay of course)! Thank u

Evul

Hi emre952!! I want to facelift my 2018 amg gtr to 2020 headlights and taillights just like the one you did. Unfortunately I don't live anywhere near you, I'm here in Dallas Texas. I'm in a process on searching for a master tech like you here. My question to you is if I can find one and need assistance on coding will you willing to help us and I will pay you for your time? Thank you so much! My Headlights and taillights will be here next week. Hope you can assist. Thank you

UCIMBZ

You can't or it is very cumbersome to convert to GTC. But 2016 GTS to 2018 GTS is much more feasible and can be done by any competent shop.

Evul

how can I contact you Emre925 got the light installed but low beam not working

mbjj57

those guys should be able to help you out.

https://www.instagram.com/carsystems/

you can even retrofit the new gauge cluster/center console https://carsystems.com.ua/mb-products-en/oled-drive-unit-retrofit-adapter-en

https://www.instagram.com/p/CPQOZZqhHvn/?utm_medium=copy_link

vdm9

So I hate to ask because its sooooo cool
Is this cost effective? Light conversion ballpark parts and labor?

UCIMBZ

Cost effectiveness implies that there is some kinda logic at work in there.

mbjj57

this



https://www.facebook.com/EBCodingperformance

AMGGT63S

try this site. It’s the Oem Mercedes’ in Germany. I ordered from them. Only thing is you’ll need to ship it to someone you know in Germany then they ship to you.

https://originalteile.mercedes-benz.de/

use google chrome to translate it to English

aalkhan

did you manage to get the low beams to work I’m facing the same problem

aalkhan

can I have @emre952 contact details as a new member I don t have the privilege of direct messaging

NYCSoiL

I would not recommend him, he took my money and did nothing.
Contact MBHouse if you want to get it done right.

aalkhan

thanks for the heads up …🙏🏻🙏🏻

Surge

Does anyone know how to install the rear fog light in US cars?

Skilly

not a chance that happened without an explanation. He worked with me late nights and early mornings to troubleshoot and get my coding done. He doesn't take money and run away.

Here is is instagram: https://www.instagram.com/ebcoding__performance/
and his whatsapp: 49 178 3483186

NYCSoiL

I'm not sponsored by MBHouse and I will not be posting our WhatsApp conversation with Emre.

V8_GTR

have you fixed this issue? And what was the fix please?

it’s a very complex and expensive job. They do not add any additional features into your car, functionality is the same as the pre-facelift headlights!