Traded in my 18 GTC, will have take off parts for sale
My guess is if they fit both, they were probably cut to stock spec GTR wheels (you suggest as much in your last response)...maybe a mm or 2 more. It means that an owner with a GTR to get a flush fit to the fender would need to run a spacer - not a biggie, but factually different from your claim that "they are the same". They aren't.
Really you are lucky to have a wider audience. HRE tends to run conservative offsets. If these were AG's or Anrky Wheels and cut for a GTR, like you are saying, they wouldn't fit a GT, GTS, or GTC. They would ONLY fit a GTR.
Last edited by Skilly; Aug 1, 2022 at 10:51 AM.
Hi Chris,
Here is the information requested regarding the wheels you have:
Fronts – 20x10 et53
Rears – 21x12.5 et50
“ET” refers to the wheel’s offset.
Please let me know if you have any questions at all!
Thank you,
Jon Kohl
Sales
HRE Performance Wheels | FlowForm Wheels
2611 Commerce Way, Suite D., Vista, CA 92081
Office: (760) 598-1960 | Fax: (760) 598-5885
Direct: (760) 597-2015 |
I ran the numbers vs stock GTR wheel offset and tire sizes and the results are below, the front wheels I have actually come out 3mm further than a stock GTR wheel setup. So yes, the custom wheel setup I have will work on a GTR and actually come out a whopping 3mm further than stock GTR wheel. It also works perfectly on a GTC, zero rubbing issues even at high speeds on Bristol Motor Speedway of Nascar fame... If it doesn't rub there it will not rub anywhere...
Below are the offset comparisons on the front and rear vs stock GTR wheel/tire/offset setup.
Front
Rear
Thank you,
Chris






