eBay Rear Spoliers for Cabrio
I was looking for the easy to install rear spoiler for the cabrio while I found some sellers for the coupe versions ($100 unpainted, $150 painted) and they said it was for the coupe only.
is the trunk on the cabrio and the coupe any different?
Thanks!
tegu
Back to the OP! I would never purchase any spoilers from ebay. I would also recommend that you purchase the MB one...just make sure it is firmly attached.
Last edited by steelgrey; May 18, 2012 at 11:24 AM.
Trending Topics
Back to the OP! I would never purchase any spoilers from ebay. I would also recommend that you purchase the MB one...just make sure it is firmly attached.
And as far as I'm concerned, I don't care where the spoiler was added, all I know is that I paid for the part to be installed and I expected it to be properly attached when I picked up my car. The fact that it wasn't implies carelessness to me.
Last edited by np888; May 18, 2012 at 03:54 PM.
The Best of Mercedes & AMG
And as far as I'm concerned, I don't care where the spoiler was added, all I know is that I paid for the part to be installed and I expected it to be properly attached when I picked up my car. The fact that it wasn't implies carelessness to me.
so my last question is the shape and size of the trunk the same for the cabrio and the coupe? Thanks!
tegu
Yes it is the same part.
Thanks Duane for this info. I was 99.9% sure that the part was still available. Between this forum and the W212 forum there are hundreds of owners with the factory spoilers installed and I have never read another post with one falling off.
It appears np888 that you may be the only Mercedes Benz owner who has had the availability of the part suspended.
It appears np888 that you may be the only Mercedes Benz owner who has had the availability of the part suspended.
All I want is to have my spoiler replaced.
however if the spoiler is bigger with a "perch" area then it will fit, or the bottom will need to be sanded slighty to fit. Genuine 3m d/s outdoor mounting tape is recommended.
Another point gentlemen, i have fitted a test spoiler on two W212 saloons, one fitted perfectly and the other was off by 2mm either side, so that leads me to think that different manufacturing plants depending on how long the mould stamp press was used(worn down) will affect the consistency of the steel trunk.
however if the spoiler is bigger with a "perch" area then it will fit, or the bottom will need to be sanded slighty to fit. Genuine 3m d/s outdoor mounting tape is recommended.
Another point gentlemen, i have fitted a test spoiler on two W212 saloons, one fitted perfectly and the other was off by 2mm either side, so that leads me to think that different manufacturing plants depending on how long the mould stamp press was used(worn down) will affect the consistency of the steel trunk.




