Has anyone ever mounted 20X9 ET 35(Front) and 20X10 ET 40 (rear)?
#1
Junior Member
Thread Starter
Has anyone ever mounted 20X9 ET 35(Front) and 20X10 ET 40 (rear)?
Just got wheels with the following dimensions:
20X9 ET 35 with 245/35/20 tires
20X10 ET 40 with 305/30/20 tires
These wheels don't fit. The rear wheels are touching the heat shield and are about 1" past the fender
The front touches the spring perch (shaped like a cup where the springs rests in) and also goes past the fenders by about 1/2 inch.
If you had success getting these type of wheels mounted on your C207, please let me know what tires you got or mods you had to do to make it fit.
20X9 ET 35 with 245/35/20 tires
20X10 ET 40 with 305/30/20 tires
These wheels don't fit. The rear wheels are touching the heat shield and are about 1" past the fender
The front touches the spring perch (shaped like a cup where the springs rests in) and also goes past the fenders by about 1/2 inch.
If you had success getting these type of wheels mounted on your C207, please let me know what tires you got or mods you had to do to make it fit.
Last edited by hudlum; 03-19-2019 at 07:37 PM. Reason: corrected grammar in title
#2
Senior Member
You may have to add a rear spacer to make these fit, or find a wheel shop to do CNC backpad milling.
see this thread, I started.
https://mbworld.org/forums/e-class-c...ft-lbs-tq.html
see this thread, I started.
https://mbworld.org/forums/e-class-c...ft-lbs-tq.html