Bolsters don't work!
#1
Junior Member
Thread Starter
Bolsters don't work!
![](https://cimg2.ibsrv.net/gimg/www.mbworld.org-vbulletin/1320x2000/img_1223_2_jpeg_bf34e1b38f01b7884614751796e044acd960cd05.jpeg)
This problem continues to haunt the seats, both seats. The seat bolsters don't seem to inflate at all on both seats. They don't seem to get any power. I've checked ALL the fuses (one by one), but I don't know if there is relay that activates the seats? Fuse numbers 44-30A and 45-30A seem to be the seat adjustment fuses according to the fuse chart and they are dead. I don't know why they're dead? There is also a relay that is very hot, but I don't know what it's for. I have not heard any motors or small compressors activate anywhere on both seats. Is there a relay that activates the bolster?
Last edited by BubaE350; 03-03-2023 at 05:47 PM.
The following users liked this post:
RealDonn (03-03-2023)
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
207: check f60 (7.5A) @ rear SAM in trunk = pneumatic pump. If fine, provide VIN to identify feature code, function differs between models, model year, etc. Could be leak, could be CU.
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/766x808/capture_088bb77387ba16a65bbb1b9cb3f232ba26a7c860.jpg)
![](https://cimg8.ibsrv.net/gimg/www.mbworld.org-vbulletin/658x529/capture2_168de49c5e5722bfdb6048cd8ac2955e082662b4.jpg)
Last edited by konigstiger; 03-06-2023 at 01:07 PM.
#7
Junior Member
Thread Starter
Last eight digits in VIN are EF240801 is usually what the dealer asks me for. The part # for the vacuum pump the dealer gave me is 000 800 33 48. Let me know what that controls?
Trending Topics
The following users liked this post:
BubaE350 (03-08-2023)