2012 E220 Airscarf
#1
Newbie
Thread Starter
2012 E220 Airscarf
Hello,
Bit of an odd one here. I've got a 2012 E220 and I seem to have Airscarf (datasheet and icar reader says so) but I don't have the buttons to activate it on the dash.
Is there another way to activate or am I missing something?
Thanks!
Bit of an odd one here. I've got a 2012 E220 and I seem to have Airscarf (datasheet and icar reader says so) but I don't have the buttons to activate it on the dash.
Is there another way to activate or am I missing something?
Thanks!
#2
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Do you have vents.
#4
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Vent is just for adjustment. Wonder if someone swapped out switch block, need your VIN again.
#6
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Here's the switch block for your vehicle, part # 2079050351.
#7
Newbie
Thread Starter
Thanks so much! Do you think that's all I need to get it back up and running?
Finding it very odd that someone has switched it out and for what purpose!
Finding it very odd that someone has switched it out and for what purpose!
Trending Topics
#8
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Only way to know if there are additional problems is to have someone pull codes using Xentry (MB diagnostics). Replacing switch block is plug & play see attachments.
#10
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,446 Likes
on
3,154 Posts
'71 Pinto
Not sure about that code, result of search:
#11
Newbie
Thread Starter
Thank you yet again, I don't have any issues with the roof, seems to go up and down as it should. Windows etc retract as they should. Hopefully it's not something that's going to become an issue later!
#12
Newbie
Thread Starter
Just want to say I ordered a new control panel, installed it and it's working perfectly.
I'm going to assume the previous owner had an aftermarket radio or something and removed and replaced the old panel. Who knows! All that matters is it's working now.
Thanks again for your help!
I'm going to assume the previous owner had an aftermarket radio or something and removed and replaced the old panel. Who knows! All that matters is it's working now.
Thanks again for your help!