18's? Width?
#1
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2007
Location: STL
Posts: 1,321
Likes: 0
Received 1 Like
on
1 Post
95 e320...sold the rest
18's? Width?
I've searched the forums...and came up short with an answer.
I'm going to be purchasing some 18 inch wheels soon, not sure on which ones yet. But my question is, whats the widest I can go without rubbing on the front or rear. Is it possible to have 18x8 (maybe 8.5) up front and 18x9 (maybe 9.5) in the rear? And If I end up with 18x8...whats the widest tire i can put on it...225/40/18?
I'm going to be purchasing some 18 inch wheels soon, not sure on which ones yet. But my question is, whats the widest I can go without rubbing on the front or rear. Is it possible to have 18x8 (maybe 8.5) up front and 18x9 (maybe 9.5) in the rear? And If I end up with 18x8...whats the widest tire i can put on it...225/40/18?
#3
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
#6
my ***** is custom, son! i was rubbing, so they hooked it up for me...!
yes, 18x8, 225/40/18 should be fine with 35 offset... look at zorro's car, and he doesn't even have the fenders rolled...
yes, 18x8, 225/40/18 should be fine with 35 offset... look at zorro's car, and he doesn't even have the fenders rolled...
Trending Topics
#8
rooney is selling his h&r's, you might be able to save a couple of hundred bucks if you buy his... put that towards rims or something
#10
Widest size for the front is 18x8, rear 18x8.5 (ET44). Minimum offset should be ET35, better if you can get an ET44 offset, 225/40's will work great, lowered or stock. On broken sets, 245's for the rear will be no problem.
Last edited by Lorinser880; 09-21-2007 at 06:32 AM.
#13
my first set of wheels were 44 offset and they wouldn't bolt up to the front hubs because the back of the wheel was contacting the caliper. it probably had a lot to do with the design of the back of the wheel, but something to keep in mind
#14
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
Here, tune into this join right here son,
http://youtube.com/watch?v=hl9NzwTZw...elated&search=
#15
MBWorld Fanatic!
Thread Starter
Join Date: Mar 2007
Location: STL
Posts: 1,321
Likes: 0
Received 1 Like
on
1 Post
95 e320...sold the rest
okay...final question to make sure i'm clear...I can run 18x8 up front (215/40) and 18x8.5 in rear? And what's the widest tire size i can go on the rear?...225? 235? 245?
#16
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
#17
Senior Member
Join Date: May 2004
Location: Atlanta
Posts: 261
Likes: 0
Received 1 Like
on
1 Post
1983 240D, 1989 300E
You straight up ballin B.
Here, tune into this join right here son,
http://youtube.com/watch?v=hl9NzwTZw...elated&search=
Here, tune into this join right here son,
http://youtube.com/watch?v=hl9NzwTZw...elated&search=
#20
STLe320, like what RBYCC said you can run 225/40's up front on 18x8's. But if you have a choice get a higher offset just to be safe. For the rear, 18x8.5's with 235 or 245 would fit, would just depend on the brand you're getting. Choose the brand with a flat sidewall.
By the way, if you're planning to get 8.5's for the rear, you have to get a broken set, 7.5 fronts & 8.5 rears, since 8.5 all-around would be no-no.
Good luck
#24
they were the replica mono 2's. pi$$ed me off too, it took me weeks to get them, and find time to mount them. and then hours to jack up each corner with the factory jack and replace all 4 wheels before realizing the effing car wouldn't move, and then undoing it all until 3am. and then months to try and sell them so i could get another set of wheels. it upsets me just thinking about it... wheels pi$$ me off, f**k wheels man, for real.
#25
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
they were the replica mono 2's. pi$$ed me off too, it took me weeks to get them, and find time to mount them. and then hours to jack up each corner with the factory jack and replace all 4 wheels before realizing the effing car wouldn't move, and then undoing it all until 3am. and then months to try and sell them so i could get another set of wheels. it upsets me just thinking about it... wheels pi$$ me off, f**k wheels man, for real.