Wheels fitment....Brabus Monoblock.
Attachment 132343
Attachment 132344fit with no problems!!


front ET 35 rear ET 38 18x8, 18x9.
I just took out the chrome plating on the fender area yesterday. It attached by the previous owner. The car looks alot cleaner. I also replaced one of the fuse for the 12V radio wire and hazard. It was previously connected on the ignition wire because it wasn't powering up. And today, I got my keyless entry that I order from Max Plus. It took 1 hour to install. Do you guys have them install in any of your cars?
These are the wheels guys let me know which ones you like...
Work LS_207
Work LS_507
Work Varianza_D3S
Work LS_406
Zone 6
Last edited by W124_GL620; Jun 5, 2008 at 11:22 PM.
I just took out the chrome plating on the fender area yesterday. It attached by the previous owner. The car looks alot cleaner. I also replaced one of the fuse for the 12V radio wire and hazard. It was previously connected on the ignition wire because it wasn't powering up. And today, I got my keyless entry that I order from Max Plus. It took 1 hour to install. Do you guys have them install in any of your cars?
The Best of Mercedes & AMG












Check it out the Link....
http://www.myhotmercedes.com/mercede..._31006-1/6749#
I have 8.5's in the back (235/45/17) and the inner lip of the fender does rub very minimally under INTENSE cornering, thats without anyone in the car....no lowering springs 


