--VIP rims on w124 rides--?? is it doable!!!
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
--VIP rims on w124 rides--?? is it doable!!!
I just wanted to know if our cars can handle some sort of rims like these cars.. its kinda crazy and cool lookin
here is a bunch of pics for kicks and i tell you some are hWATT
here is a bunch of pics for kicks and i tell you some are hWATT
Last edited by berti_00; Nov 17, 2008 at 02:37 AM.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
but do they make those kinda rims in like offsets of 35 etc ? i know as long as the offset is good even if they are wide that would be fine
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,907
Likes: 2
From: So Cal
92 500e, 95 E34 525I Touring
You do realize that the majority of those cars have EXTENSIVE fender modifications. right?
So to answer your question, yes it could be done. Should, is a completely different story.
On the other hand, the second and last pictures (same car) actually have a decent-looking set of wheels on them.
The mechanics of having a 35 offset on our cars simply does not physically allow for that much dish without some major fender flaring. Talk to bluecoupe and ask how much it cost him to do his 500e rear fenders. His car looks amazing.
So to answer your question, yes it could be done. Should, is a completely different story.
On the other hand, the second and last pictures (same car) actually have a decent-looking set of wheels on them.
The mechanics of having a 35 offset on our cars simply does not physically allow for that much dish without some major fender flaring. Talk to bluecoupe and ask how much it cost him to do his 500e rear fenders. His car looks amazing.
Last edited by rivcal4life; Nov 17, 2008 at 03:08 AM.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
You do realize that the majority of those cars have EXTENSIVE fender modifications. right?
So to answer your question, yes it could be done. Should, is a completely different story.
On the other hand, the second and last pictures (same car) actually have a decent-looking set of wheels on them.
So to answer your question, yes it could be done. Should, is a completely different story.
On the other hand, the second and last pictures (same car) actually have a decent-looking set of wheels on them.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
MBWorld Fanatic!
Joined: Feb 2006
Posts: 1,325
Likes: 2
From: Seattle
1990 300ce
You can get wheels with all kinds of different offsets and widths... That's not the problem. The issue here is that the w124 doesn't have room for it.
Said another way... go out to your car and measure the lip of your wheel. Then measure the distance between your tire and the inner edge of your fender (from what I remember, I would be surprised if you have more than a quarter of an inch). Add those two numbers together. That's how big of a lip your car can accomodate without modifications to your fender. You might be able to stretch your tires a little to gain an extra .5" of lip.
To do this properly, it would cost you a fortune... and for what? IMO, those cars are very ghetto.
Said another way... go out to your car and measure the lip of your wheel. Then measure the distance between your tire and the inner edge of your fender (from what I remember, I would be surprised if you have more than a quarter of an inch). Add those two numbers together. That's how big of a lip your car can accomodate without modifications to your fender. You might be able to stretch your tires a little to gain an extra .5" of lip.
To do this properly, it would cost you a fortune... and for what? IMO, those cars are very ghetto.
Super Member
Joined: Feb 2006
Posts: 801
Likes: 0
From: Anaheim, CA
a TVR Cerbera Speed Twelve
I think it's been kinda done before...
https://mbworld.org/forums/e-class-w...y-few-pix.html
http://www.wald.co.jp/ownersgallery/11/0083.html
https://mbworld.org/forums/e-class-w...y-few-pix.html
http://www.wald.co.jp/ownersgallery/11/0083.html
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
I think it's been kinda done before...
https://mbworld.org/forums/e-class-w...y-few-pix.html
http://www.wald.co.jp/ownersgallery/11/0083.html
https://mbworld.org/forums/e-class-w...y-few-pix.html
http://www.wald.co.jp/ownersgallery/11/0083.html
any info on the size tires offset etc
Member
Joined: May 2007
Posts: 202
Likes: 0
From: Little Rock, Arkansas
1995 E 420
MBWorld Fanatic!
Joined: Dec 2002
Posts: 3,491
Likes: 2
From: Vancouver, BC
Enzo, my Benzo
You can get wheels with all kinds of different offsets and widths... That's not the problem. The issue here is that the w124 doesn't have room for it.
Said another way... go out to your car and measure the lip of your wheel. Then measure the distance between your tire and the inner edge of your fender (from what I remember, I would be surprised if you have more than a quarter of an inch). Add those two numbers together. That's how big of a lip your car can accomodate without modifications to your fender. You might be able to stretch your tires a little to gain an extra .5" of lip.
To do this properly, it would cost you a fortune... and for what? IMO, those cars are very ghetto.
Said another way... go out to your car and measure the lip of your wheel. Then measure the distance between your tire and the inner edge of your fender (from what I remember, I would be surprised if you have more than a quarter of an inch). Add those two numbers together. That's how big of a lip your car can accomodate without modifications to your fender. You might be able to stretch your tires a little to gain an extra .5" of lip.
To do this properly, it would cost you a fortune... and for what? IMO, those cars are very ghetto.
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,907
Likes: 2
From: So Cal
92 500e, 95 E34 525I Touring
Another option that Ive seen done is shortening the axle. Like bigpete said though, a lot of money for what many would consider a negative gain.
Senior Member
Joined: Nov 2006
Posts: 259
Likes: 0
From: SoCal
1992 300CE
Whoa! VIP is not ghetto. VIP is presidential status, gangsta status, money making i dont give a fk status. The people that roll in those cars have a chauffeur that drive them around, thats how ballin VIP is.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
MBWorld Fanatic!
Joined: Jun 2006
Posts: 4,968
Likes: 3
1990 300ce 24v I6
It also looks ridiculous. Money can't buy class, case in point: VIP or Donk. But, this falls under the "whatever makes you happy" category, so have at it berti. Just make sure you document it carefully so everyone else who wants to know what is involved can learn from what you did.
Thread Starter
MBWorld Fanatic!
Joined: May 2007
Posts: 6,406
Likes: 140
From: Clearwater Beach, Florida
2016 Cls63s AMG
It also looks ridiculous. Money can't buy class, case in point: VIP or Donk. But, this falls under the "whatever makes you happy" category, so have at it berti. Just make sure you document it carefully so everyone else who wants to know what is involved can learn from what you did.
but what is pissing me off and makeing me mad is that i had the opportunity when i first bought my MONOBLOCKS to get 9.5s and they had a hot sexy 3inch lip and i was scared to buy them and now i regret it so much cuz i cant find them no more
and i know they would have fited me with no problem and still would of had that sick almost VIP style grrrrrrrrrr am a loserright now am heading towards Air ride suspension
MBWorld Fanatic!
Joined: Feb 2006
Posts: 1,325
Likes: 2
From: Seattle
1990 300ce
To me, guys making tons of money who were into modding their cars to get attention would mod a bentley, not a w124.
