STLe320

I've decided after I lower it, in the spring I plan to get new wheels and tires. I think i'm gonna go with this style.
http://cgi.ebay.com/ebaymotors/18-ST...Q5fAccessories

However, i really like these...
http://cgi.ebay.com/ebaymotors/18-AU...Q5fAccessories

Do you guys know any other wheels out there with that kind of style and lip?

berti_00

first ones NO

second yes but still not really a benz style... plus they gone be a pain in the *** to wash

ZorroAMG

Not a fan of mesh style wheels on our older cars, but it's your car, so best of luck!

Saijin_Naib

Both are going to be hard to rock without some serious lowering, aggressive body styling and a massive brake kit.

YNVDIZW124

I tried these 19" HP evo wheels but i don't think they go with our cars either.
I would say black with a stainless steel lip would look much better.

190E 16V

I like them.

However the 1st one may not fit.

The 2nd one is Audi and WILL NOT fit.

Quicksilver500

I agree. The newer Audi's have the same bolt pattern but the hub is smaller. I tired to use a set of Audi spacers on my car and the hub was too big. MB wheels are hub centric so thats important

-Mike

rivcal4life

Didnt you post this thread a few months ago? Haha

What happened to those carlsson 1/15 replicas we decided on?

STLe320

Uhh...to be honest I couldn't tell you..lol

PeterGunz

This might be the closest you are going to get to that style... http://www.alloywheelsdirect.net/mer...poke_wheel_235 I agree, don't think that style would look very good on your car. And you are going to be hard pressed to get a lip over 1-2 inches with our offset.... I am still looking for a set of Aero 1's in good shape but may end up settling for some Mandrus Wheels- http://www.mandruswheels.com/

PeterGunz

Check these out - If you are still sold on the style --- http://www.mandruswheels.com/millennium.html#

YNVDIZW124

Here you go... I don't know if they are going to stay on the car but i've had at least 8 sets of wheels on my car in two years...

berti_00

i wish i could do put my spoiler like you even without the tail pieces it looks sick...

STLe320

I like that style a lot...But I'm really looking for something with more than a 1 inch lip.

YNVDIZW124

Something like this??

STLe320

Yep, pretty much. Except preferably a harder edge on the lip though..

demagod

the depth of dish on those wheels are lovely, I like them... I have been searching for some wheels i really want, but the cost/style is a bit of a bugger. But this place is good, they make any wheel to any stud pattern/offset etc...

www.imagewheels.co.uk