Who makes mufflers for the W124 and whats the best to get?
#27
Super Member
Thread Starter
Join Date: Jul 2005
Location: Denver,CO USA
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
"88 300CE- First Year Production
I notice thats yours is a 500e so my pipes don't need to be as big if I went that route. All I was able to find was this link on ebay for a cat, good size to go with?
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
#28
MBWorld Fanatic!
Join Date: Nov 2001
Location: Kirkland, WA
Posts: 1,213
Likes: 0
Received 5 Likes
on
5 Posts
500E Signal Rot
I notice thats yours is a 500e so my pipes don't need to be as big if I went that route. All I was able to find was this link on ebay for a cat, good size to go with?
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
You can go to Magaflows site and put in your specifics and they will tell you what part to use. I don't have any experience with Catco products, personally I would stil with main stream products, like Magaflow or something equilivant.
http://www.magnaflow.com/
#29
MBWorld Fanatic!
Join Date: May 2005
Location: REHOBOTH BEACH DE
Posts: 2,494
Likes: 0
Received 17 Likes
on
17 Posts
88-300CE TWIN TURBO, 99-C43, 05-G55K, 71-280SL, 94-E320 CAB, 08 CLK63 BLACK SERIES
I notice thats yours is a 500e so my pipes don't need to be as big if I went that route. All I was able to find was this link on ebay for a cat, good size to go with?
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=
I gained a little over 10HP on a load dyno with twin Magnaflow spun metals over a stock SL500 two in/two out converter...not to mention that I rattled the bricks in two stock converters on the dyno, but the spun metal still fine after two years. Just passed my state emissions with no problem !
http://www.randomtechnology.com/
http://www.car-sound.com/02product/u...al/500spun.asp
#31
Super Member
Thread Starter
Join Date: Jul 2005
Location: Denver,CO USA
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
"88 300CE- First Year Production
Guys, I'm just gonna add an aftermarket muffler to my setup, can anybody tell me what size of an inlet I need for an aftermarket mufflerand if it will need to be centered or offset?, I'm thinking about the borla xr series, borla sounds nice already on my suv!!!