How do I reset the SRS light!!
07-12-2007, 08:28 PM
#3
Almost a Member!
Thread Starter
Join Date: Jul 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
07-13-2007, 07:21 AM
#4
Senior Member
Join Date: Jan 2007
Location: Südflorida
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
'99 E430, '05 ML500, '15 GLK350
You need a special scanner to reset it, not just the OBDII. Call around to some independent shops and find a sgood one who can do it. The dealers wanted $100 minimum for the 2-minute job - but my local shop did it for free (I gave him a $20 tip).
07-13-2007, 12:19 PM
#5
Super Member
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
'97 MB E420 Sport/'88 MR2
07-16-2007, 10:29 AM
#6
Member
Join Date: Apr 2006
Location: Richardson, TX
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
'04 Cobra & '04 S430
I'm pretty sure it is a self testing system. Correct the problem and the light will go off on it's own.
OBDII on my car does not pick up on the SRS errors - so I doubt that is the solution.
OBDII on my car does not pick up on the SRS errors - so I doubt that is the solution.
07-18-2007, 07:14 AM
#7
Senior Member
Join Date: Jan 2007
Location: Südflorida
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
'99 E430, '05 ML500, '15 GLK350
Nope. It won't clear. I just had the same problem a few weeks back, setting the SRS light permanently when I turned the ignition on while the airbag was out. It doesn't clear itself - someone told me it's a law now.
The scanner used to clear it plugged into the connector under the hood, near the fuse box on the driver's side.
The scanner used to clear it plugged into the connector under the hood, near the fuse box on the driver's side.
