The start of my Turbocharged E320 project
07-08-2008, 10:16 PM
#51
EDIT whoops read it wrong. The oil line goes from a auxilary hole in the oil filter housing to a 4an restricted plate on the feed side of the turbo.
Last edited by Max Hughes; 07-08-2008 at 10:18 PM.
07-13-2008, 10:56 PM
#52
Really short idle
http://www.youtube.com/watch?v=5qEgfqv8tiM
http://www.youtube.com/watch?v=5qEgfqv8tiM
07-23-2008, 11:27 AM
#55
I cut down the MAF housing in the begining so its squished between the filter and the blue coupler on the 2nd shot of my intake. Extended the wires 3-4 feet. I decided for Drawthrough since mercedes MAFs are half stupid anyway 
07-23-2008, 04:04 PM
#56
MBWorld Fanatic!
Join Date: Dec 2006
Location: Clifton, NJ
Posts: 4,949
Likes: 0
Received 37 Likes
on
32 Posts
96 and 08 911 turbos
In that case, you shouldn't be venting the blow off to the atmosphere, because you will be dumping metered air. The car will generally run pretty rich in this case.
07-23-2008, 10:45 PM
#59
MBWorld Fanatic!
Join Date: Dec 2006
Location: Clifton, NJ
Posts: 4,949
Likes: 0
Received 37 Likes
on
32 Posts
96 and 08 911 turbos
that works so long as it gets recirculated after the maf but before the turbo. Just make sure that you don't get maf wash when the recirculated air gets blown backwards over the maf. if you can, when you weld the bypass fitting onto your intake tube, weld it on at an angle pointed away from the maf.
08-07-2008, 03:29 AM
#60
Update. The car is tuned to 8psi and will be on the dyno soon. My buddy jordan and I have been tuning using a wideband and a notebook for several days now and Dutch, the local mercedes mechanic, says it pulls harder than any non supercharged e55 he has driven so im pretty pumped, especially since im going up to 12 psi soon.
02-07-2009, 11:54 PM
#62
Member
Join Date: Oct 2002
Location: FL
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
W124 E36T AMG; W124 500E
I wonder if I could boost my C36 M104 engine with it's high-compression ratio using water-injection . . .
I still can't believe you're selling the setup . . .
:-) neil
I still can't believe you're selling the setup . . .
:-) neil
