E320 wagon. Won't Start
Thread Starter
Newbie
Joined: Dec 2008
Posts: 2
Likes: 0
2000 E320W 4matic
E320 wagon. Won't Start
I went out this afternoon to get a christmas tree. Once the tree was loaded in the back of the wagon. I got back in to start the car. Nothing. All the lights worked but no cranking. No sound.
I tried it again. Then everything off. door locked then unlocked. Nothing.
I call my mechanic. He said to try it in neutral and park. Nothing.
Lights are bright. The car seems good. It is minus 10 C.
I get a boost from truck. Nothing. Towed to garage. We try all tricks. Nothing.
Any ideas. The car is 4matic. The starter is deep job. Labour will be high!
I tried it again. Then everything off. door locked then unlocked. Nothing.
I call my mechanic. He said to try it in neutral and park. Nothing.
Lights are bright. The car seems good. It is minus 10 C.
I get a boost from truck. Nothing. Towed to garage. We try all tricks. Nothing.
Any ideas. The car is 4matic. The starter is deep job. Labour will be high!
MBWorld Fanatic!
Joined: Nov 2001
Posts: 3,860
Likes: 3
From: Jacksonville Florida
209/W210 Estate /W211 modded by MBENZNL
Nothing happens when the key is in the crank position? Click?
Try to wiggle the shifter in N or P when cranking
or
Try another key
Try to wiggle the shifter in N or P when cranking
or
Try another key
Last edited by MARK CUMMINS; Dec 24, 2008 at 04:49 PM.
MBWorld Fanatic!
Joined: Apr 2007
Posts: 6,171
Likes: 16
300E a couple 1994 w124wagon E320 Wagon/,1971MGB Track/Rally, MG Midget Autocross ,2000 E320 wagon.
Battery
can be tricky.Lights can be bright and battery can be well below cranking range.Get it on a 10 amp charger overnight using the under hood charging post,and see what you get.
Member
Joined: Jan 2006
Posts: 178
Likes: 4
From: Austin, TX
2012 C250
doing a google search on the code you got led me to this page:
http://www.hotequip.com/UploadFiles/...0225322353.pdf
which contained this message:
2030 No or incorrect CAN message from control unit N15/5 (electronic selector lever module control module) (P0600).
I don't know if it does, but I hope that helps.
http://www.hotequip.com/UploadFiles/...0225322353.pdf
which contained this message:
2030 No or incorrect CAN message from control unit N15/5 (electronic selector lever module control module) (P0600).
I don't know if it does, but I hope that helps.
