Need a Catalytic converter for 97 e 300d
12-08-2009, 05:49 PM
#1
Newbie
Thread Starter
Join Date: Aug 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
e300d
Need a Catalytic converter for 97 e 300d
Can anyone recommend an after market part number for a catalytic converter for 97 e 300 d . I live in baton rouge louisiana. I went to flowmaster's website but could not search for it. If i find one i will buy and have a local mechanic install it. The dealership wanted 1200 for the part only. Also , should i change out the small resonator close to the rear of the vehicles tail pipe
12-08-2009, 06:37 PM
#2
There are no direct fit aftermarket parts for this. I checked when mine went bad and I just hollowed out the convertor as the insides were making a rattling noise.
Why are you replacing this part?
-Is it rusted out?
-Or, is it making a rattling noise?
I would suggest replacing it with a straight pipe if it is rusted out.
If it is just rattling, and the shell is intact, then removed the exhaust system. Get a very long file and jam it inside the convertor. Do this until you remove all of the internal filter. You will have a hollowed out pipe then.
Why are you replacing this part?
-Is it rusted out?
-Or, is it making a rattling noise?
I would suggest replacing it with a straight pipe if it is rusted out.
If it is just rattling, and the shell is intact, then removed the exhaust system. Get a very long file and jam it inside the convertor. Do this until you remove all of the internal filter. You will have a hollowed out pipe then.
12-09-2009, 11:17 AM
#4
From what I remember, there are no sensors on the exhaust system itself. Mine might be different because i have the turbo and you are N/A. My guess is that they are very similar. As long as you keep the stock muffler, the sound shouldn't be too much louder.
I have a hollowed out cat with a Brabus muffler and the car is a little louder, but sounds great.
I have a hollowed out cat with a Brabus muffler and the car is a little louder, but sounds great.
12-09-2009, 01:28 PM
#5
MBWorld Fanatic!
P0200
is an injector circuit fault.Get it fixed.
Look at magnaflow for universal cats(about 60 bucks)
Then you have a shop splice it in.
Look at magnaflow for universal cats(about 60 bucks)
Then you have a shop splice it in.
12-11-2009, 12:56 PM
#6
Super Member
Curious code on semi electronic, chain driven IP with mechanical inj's. I'd check again using a different scanner if it were me......
After a cursory review, MagnaFlow doesnt appear to sell any "diesel catalyst" products for MB's.
After a cursory review, MagnaFlow doesnt appear to sell any "diesel catalyst" products for MB's.
Trending Topics
12-12-2009, 12:05 PM
#8
Super Member
http://www.detali.ru/cat/oem_mb2.asp...SGR=285&SGN=04
I expect he's got gasser "catalytic converters" which are very different animals.
