I need an affordable replacement front bumper for an e430 HELP
#1
Member
Thread Starter
Join Date: Sep 2011
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
2000 e430 4matic
I need an affordable replacement front bumper for an e430 HELP
Roads are horrible and my front bumper could be looking better.. Half of it is missing
I need an affordable replacement, I've found it on ebay for about 140 bucks but they have no headlamp washer.. HELP
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
#2
I work in a bodyshop, so my advice to you is look for a USED bumper and stay as far away as possible from Chinese replicas or Jobber bumpers as they are referred to in the trade. They do not fit our and most German cars properly
, you'll waste your money and time trying to adjust it
.
Good luck.
![report](https://mbworld.org/forums/images/smilies/report.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
Good luck.
#4
Member
Join Date: Dec 2011
Location: Ohio USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz E-Class
Bumper
Hey man I was just getting ready to order an aftermarket bumper cover for my E-class from here: http://www.performanceproducts4benz.com/ Very good prices, $209 for an E320 bumper cover. As it turned out for me however, my body shop gave me their cost which was very close to Performance so I never ordered it from Performance. However, I have ordered other parts through Performance and have been very pleased!
#5
Member
Join Date: Dec 2011
Location: Ohio USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz E-Class
Re: Aftermarket Parts
"Jobber" is a price rate not a brand or quality rating. Although I agree not all aftermarket products are the best; to assume that they are all junk however, is very short-sighted.
#6
Most of them are, at least the ones I've seen. I'm talking about OEM replacement products which are supplied by big companies like Keystone and BMC, despite having their fit guaranteed they rarely fit any German cars, materials, plastic welds are also substantially lower quality than originals especially for older cars. It is not uncommon for VW jobber bumpers to literally come apart during trial fit or final assembly. OEM moldings usually cannot be installed into such bumpers, due to variations in dimensions, material thickness and rigidity, Jobber moldings don't fair much better either.
As for the 'body-kit' style bumpers, some are better than others, although most suffer from the same faults especially the fiber-glass ones. not to mention the fact that, for the most part they are significantly weaker and won't absorb the impact in the same way that a factory bumper would.
Just my 2cents.
As for the 'body-kit' style bumpers, some are better than others, although most suffer from the same faults especially the fiber-glass ones. not to mention the fact that, for the most part they are significantly weaker and won't absorb the impact in the same way that a factory bumper would.
Just my 2cents.
Trending Topics
#10
MBWorld Fanatic!
Washers
came with the xenon option cars so that is what you are looking for.
You have factory xenons?
You have factory xenons?
#12
Member
Thread Starter
Join Date: Sep 2011
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
2000 e430 4matic
Could someone please help me because I simply cannot find this bumper. The only one i've been able to find was 500 bucks from a salvage yard and has damage. I don't want to have to just take out the head light washers just to make the bumper fit.
#14
Member
Join Date: Dec 2011
Location: Ohio USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz E-Class
Re: Correction
I deleted that post because when I went back and looked at it, it was in fact only for models without the lens wiper. You might want to call Performance however and ask them directly or if they might have a resource for you. They have been very good people to work with on my end so I am sure if they can assist you that they will.
#15
Member
Here are some prices on original new, original used, and aftermarket. Check out the one at ECS Tuning... it may be the one you need, brand new original mercedes benz for $285. (Double check your part number to make sure it is correct. I think you need part number 2108852325).
http://www.everythingbenz.com/z/part...er-cover-front
http://www.everythingbenz.com/z/part...er-cover-front
#16
Member
Join Date: Dec 2011
Location: Ohio USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz E-Class
Re: Nice Resource...
just bookmarked it!
Here are some prices on original new, original used, and aftermarket. Check out the one at ECS Tuning... it may be the one you need, brand new original mercedes benz for $285. (Double check your part number to make sure it is correct. I think you need part number 2108852325).
http://www.everythingbenz.com/z/part...er-cover-front
http://www.everythingbenz.com/z/part...er-cover-front
#17
MBWorld Fanatic!
Join Date: May 2008
Location: Pittsburgh,PA, Cambridge, Ontario, CN
Posts: 1,072
Likes: 0
Received 4 Likes
on
3 Posts
2003 S210 3.8L Brabus wagon
Call our Sponsor My MercedesParts.com and speak to Bob Rox. They are a dealer in Atlanta GA USA. He is 35 years knowledgeable and they have a great pricing structure due to the Internet business. I recommend him and them highly.
#18
Super Member
I deleted that post because when I went back and looked at it, it was in fact only for models without the lens wiper. You might want to call Performance however and ask them directly or if they might have a resource for you. They have been very good people to work with on my end so I am sure if they can assist you that they will.