OEM Navigation Retrofit w/ pics
One thing you can do, is find another car (like on eBay) that is the same year, model , trunk interior color, rear seat config (folding versus non folding) as yours....but HAS the Navigation option. Take this VIN number, and call your dealer. With that VIN number, they should be able to look up the parts individually.
Alternatively, you can contact mbdoctor.com, and order a kit from them...or perhaps they'll confirm the individual part numbers you need.
Cheers, TJ
Last edited by Toolman_Johnny; Dec 14, 2010 at 12:36 PM.
I just wish someone had a pick of this "notch"
9F08 is the colorcode for the W211 trunkpanels as of VINnumber A644805 (07/13/2004) and X170411 (08/17/2004) where as 9C53 is the colorcode for the W211 trunkpanels before thse Vin numbers...
9C53 is anthracite...9F08 is black...the 2005 W211 needs a black trunkliner...
greetingz,
Is anthracite grey? My parts guy is saying its black..... my 211 was built in early 03.....
anyone have the part number for a w211 with folding rear seats, NAV and grey trunk liner?
The correct part number will depend on model year, options installed, and color. Save yourself the hassle (or ordering the wrong panel), and find a vehicle (on eBay or AutoTrader.com) with the same model year, options installed and color you need. Write down the vin number of that car, and call your dealer to get the proper part number for the trunk panel. There's still a risk in doing this....in the event that that other car had the NAV system retrofitted. But, the risk is sufficiently low...since there aren't too many people out there that have retrofitted NAV systems in their MB.
Your dealer has no way to tell you which panel (part number) will work for your car. The only way they can look it up, is by VIN number. And, at risk of stating the obvious, your VIN number won't work...since your car didn't come with Nav.
By the way, anthracite is black.
Cheers, TJ
The Best of Mercedes & AMG

The correct part number will depend on model year, options installed, and color. Save yourself the hassle (or ordering the wrong panel), and find a vehicle (on eBay or AutoTrader.com) with the same model year, options installed and color you need. Write down the vin number of that car, and call your dealer to get the proper part number for the trunk panel. There's still a risk in doing this....in the event that that other car had the NAV system retrofitted. But, the risk is sufficiently low...since there aren't too many people out there that have retrofitted NAV systems in their MB.
Your dealer has no way to tell you which panel (part number) will work for your car. The only way they can look it up, is by VIN number. And, at risk of stating the obvious, your VIN number won't work...since your car didn't come with Nav.
By the way, anthracite is black.
Cheers, TJ
I guess you did not intend to say that anthracite and black are the same colour? Anthracite is black but 9F08 black is a different colour from 9C53 anthracite.
The dealers have good tools that allow easily to pick up the correct part for a car if they just spend some time with their tools. You probably mean that the parts guys are used to looking up parts based on the car VIN but are too simple to look up a part that is needed for a retrofit task.

See what EPC says for that colour code. The only colour options EPC gives for 211 (I only tried 211.026) are "anthracite" and "single tone black". I'm guessing the MB anthracite is light enough that you would call it grey. Fair enough but in MB spare parts terms it would be anthracite and there is no "grey" available at all.
Or are you saying EPC has been wrong all these years?
Last edited by Toolman_Johnny; Feb 2, 2011 at 09:11 AM.


That's a pic I took of the following:
Trunk liner
- Rear folding seats
- No power outlet
- Color Gray
211-690-01-53-9C53

In the end, it doesn't really seem to matter what the color code is named, does it? Color code 9C53 is Grey, and 9F08 is Black. If some MB systems, or some people want to refer to Grey as Anthractie, knock your socks off. It's still Grey. When I ordered my black panel, the parts guy told me that the color code 9F08 was referred to in his system as "Anthracite". But again...who cares what it's called. If you need a Grey panel, the part number should end with 9C53....if you need Black...the part number should end with 9F08. I'm tapping out on this one.
Last edited by Toolman_Johnny; Feb 4, 2011 at 11:42 AM.









