Finally some pics...what do you think?
04-27-2005, 07:10 PM
#1
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Finally some pics...what do you think?
First let me just say that I was originally fairly dissappointed because the Mrs. put a limit on my wheel allowance. (She's trying to cure me of my lifelong mod fever, she says... 
) So I searched and searched, and found these on ebay for an unbelievable price. I have a set of AMG lowering links on the way from a vendor on the East Coast as well (without her knowing, or course...lol). They should be arriving tomorrow. 
Anyway, I liked how these wheels turned out. They're 19 x 8.5 (front) and 19 x 9.5 rear. The centers are hyper black gun metal, with diamond cut polished lips. The entire package, brand new, with tires, cost me $1699.00. What do you guys think?
) So I searched and searched, and found these on ebay for an unbelievable price. I have a set of AMG lowering links on the way from a vendor on the East Coast as well (without her knowing, or course...lol). They should be arriving tomorrow. Anyway, I liked how these wheels turned out. They're 19 x 8.5 (front) and 19 x 9.5 rear. The centers are hyper black gun metal, with diamond cut polished lips. The entire package, brand new, with tires, cost me $1699.00. What do you guys think?
Last edited by MB Dreamz; 04-27-2005 at 07:20 PM.
04-27-2005, 07:18 PM
#4
Senior Member
Join Date: Mar 2005
Location: By the City by the Bay, CA
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
2001 E320 (210.065), Brilliant Silver; 2002 Ducati ST-2, Arrest-me Red
Looks sharp!
Hi, Dreamz.
It looks sweet. As a friend of mine who is REALLY into mods might say, "keep the car, lose the wife!"
Take care and enjoy the ride; it should be getting sweet in Chi-town any time now. GO CUBS!
Greg
It looks sweet. As a friend of mine who is REALLY into mods might say, "keep the car, lose the wife!"
Take care and enjoy the ride; it should be getting sweet in Chi-town any time now. GO CUBS!
Greg
04-27-2005, 07:22 PM
#5
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Originally Posted by Gregs210
Hi, Dreamz.
It looks sweet. As a friend of mine who is REALLY into mods might say, "keep the car, lose the wife!"
Take care and enjoy the ride; it should be getting sweet in Chi-town any time now. GO CUBS!
Greg
It looks sweet. As a friend of mine who is REALLY into mods might say, "keep the car, lose the wife!"
Take care and enjoy the ride; it should be getting sweet in Chi-town any time now. GO CUBS!
Greg
Btw, thanks guys.
04-27-2005, 07:28 PM
#6
Senior Member
Join Date: Mar 2005
Location: By the City by the Bay, CA
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
2001 E320 (210.065), Brilliant Silver; 2002 Ducati ST-2, Arrest-me Red
My bad...
Hey, Dan. Why did I think you were in Chicago? I have to get a new crack dealer. 
But I'm still a Cubs fan.
In truth I wish my friend's wife would exercise a little control; the guy really loves his mods. And the bad part is he encourages me to spend lots of money in that vein as well. Your wife sounds like a keeper; I'm sure my friend is just joking when he makes such comments.
Take care,
Greg
But I'm still a Cubs fan.
In truth I wish my friend's wife would exercise a little control; the guy really loves his mods. And the bad part is he encourages me to spend lots of money in that vein as well. Your wife sounds like a keeper; I'm sure my friend is just joking when he makes such comments.
Take care,
Greg
Trending Topics
04-27-2005, 07:37 PM
#8
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Originally Posted by Gregs210
Hey, Dan. Why did I think you were in Chicago? I have to get a new crack dealer.
But I'm still a Cubs fan.
In truth I wish my friend's wife would exercise a little control; the guy really loves his mods. And the bad part is he encourages me to spend lots of money in that vein as well. Your wife sounds like a keeper; I'm sure my friend is just joking when he makes such comments.
Take care,
Greg
But I'm still a Cubs fan.
In truth I wish my friend's wife would exercise a little control; the guy really loves his mods. And the bad part is he encourages me to spend lots of money in that vein as well. Your wife sounds like a keeper; I'm sure my friend is just joking when he makes such comments.
Take care,
Greg
04-27-2005, 10:22 PM
#12
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Thanks.
The wheels are from a new company called Ruff Racing. And regarding tint, you can't tell from the pics, but there's mirror tint on there. It actually sets off the hyper black gun metal centers of the wheels perfectly.
The wheels are from a new company called Ruff Racing. And regarding tint, you can't tell from the pics, but there's mirror tint on there. It actually sets off the hyper black gun metal centers of the wheels perfectly.
04-27-2005, 11:18 PM
#13
MBWorld Fanatic!
Join Date: Dec 2003
Location: Sacramento
Posts: 1,586
Likes: 0
Received 1 Like
on
1 Post
'08 AM Vantage V8 - '03 E500
Originally Posted by MB Dreamz
She survived through a 2000 C5 that emptied over $135K out of our bank account. I think she's keeper. LOL
Btw, thanks guys.
Btw, thanks guys.
04-27-2005, 11:46 PM
#14
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Extensive list of mods, including 3 motor rebuilds, competition sound systems, 6 point cage, and the list goes on and on. That figure does not include maintenance or other misc wear and tear costs throughout the 4 years of ownership. Sadly, that car spent more time in the shop then on the road. Now that I think about it, I can say that a lot of the mod money was wasted on R&D. If I ever get the chance to do it over, I would save a good portion of that money.
04-28-2005, 09:28 AM
#17
Super Member
Join Date: May 2003
Location: Chicago Western Burbs
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
'06 SL65
Originally Posted by MB Dreamz
Extensive list of mods, including 3 motor rebuilds, competition sound systems, 6 point cage, and the list goes on and on. That figure does not include maintenance or other misc wear and tear costs throughout the 4 years of ownership. Sadly, that car spent more time in the shop then on the road. Now that I think about it, I can say that a lot of the mod money was wasted on R&D. If I ever get the chance to do it over, I would save a good portion of that money.
What kind of mods did you have? 427 stroker, ATI D1SC Supercharger, A&A TT, Magnuson SC?
I had the Agostino Racing Stage II Heads and Cam and bought an ATI D1SC Supercharger but because my compression was 10:1.....I had to buy the A&A bigger single intercooler, Racetronix Fuel Pump and other goodies to safeguard the bottom end. I decided to sell the car before I installed the SC.....that was a waste of money on my part.
3 motors rebuild
you must be pushing some major HP.....hopefully you beefed up the bottom end and forged your pistons and connecting rods. 
04-28-2005, 10:00 AM
#18
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
I co-founded Rev Xtreme in Tampa, but sold the company + Vette to my partner when I left at the end of last year. I was also one of the orginal victims of the MMS "Valve Spring" issue in 2000, which led me to Norris in Orlando. There's nothing like dumping over $15K for a H/C car, right? LOL All in all, the car had 3 different engine packages during my ownership. I recently heard they replaced the forged 408 for a new 346 R&D package. Now, that 408 was the first LQ9/LS6/LS2 combo engine in the country. We were the first to fully tune and utilize certain C6 components in the C5. I'm not sure of the details on the 346. But if I had to guess, I would say forged LS6 with ATI F1R blower.
04-28-2005, 10:34 AM
#19
Super Member
Join Date: May 2003
Location: Chicago Western Burbs
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
'06 SL65
Sweeeet.......I see Rev Xtreme is a supporting tuner of the CF. Sounds like they are doing very well. Sorry to hear about the Morgan Motorsport situation....are they still in business? I know there was also a big issue about John Hennessy fiasco and lawsuits a couple of years ago. I was lucky that my buddy use to own a Vette shop here and so I got parts at cost. I also know MattG so I decided to buy my H/C from him through A.R.E.(I'm sure you know or heard of him in the CF). HP is addictive.....I swore after getting the H/C....that was it. After a few weeks it wasn't fast enough and I wanted more....LOL.
Congrats on your new W211!
I was lucky that my buddy use to own a Vette shop here and so I got parts at cost. I also know MattG so I decided to buy my H/C from him through A.R.E.(I'm sure you know or heard of him in the CF). HP is addictive.....I swore after getting the H/C....that was it. After a few weeks it wasn't fast enough and I wanted more....LOL.Congrats on your new W211!
04-28-2005, 11:21 AM
#20
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
Yeah, after a couple of weeks of the first H/C package I said, "GIVE ME NITROUS!!!"
Btw, I used to go by C500HP Take care.
Btw, I used to go by C500HP
Take care.
04-28-2005, 11:32 AM
#21
Member
Join Date: Jun 2003
Location: West Hell
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Air Force 1s
They look sweet! Can you get them in 20"s or any other kind of finishes? Your car looks hot but not totally sure about the gunmetal with the black car. I have black also and would like to get either black or a polished finished wheel. BTW what size are the lips? They look big.
Can you get them in 20"s or any other kind of finishes? Your car looks hot but not totally sure about the gunmetal with the black car. I have black also and would like to get either black or a polished finished wheel. BTW what size are the lips? They look big.
04-28-2005, 10:39 PM
#23
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
I believe the lips are 2'' in the front and 3" in the rear. I don't know if they make them in 20"s. These were the only ones I found on ebay. Here's a pic of the wheel.
04-28-2005, 11:02 PM
#24
Super Member
Join Date: Oct 2004
Location: Bay Area
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
06 CLS500 + 99 ML320
Originally Posted by MB Dreamz
I believe the lips are 2'' in the front and 3" in the rear. I don't know if they make them in 20"s. These were the only ones I found on ebay. Here's a pic of the wheel.
Thanks in advance,
hlkc
04-29-2005, 12:42 AM
#25
Almost a Member!
Thread Starter
Join Date: Apr 2005
Location: Houston, TX
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
'06 Rover | '07-E350
If any of you are interested, please PM me, and I'll forward you the link to my winning purchase on ebay. You can contact the vendor directly. Would I recommend them? For the price, I don't think you can find a better set of wheels. I love the looks, and feel. There was one minor modification done by my mechanic for the front wheels. They fit a bit too snug for his liking so he lightly ground the cores of the front wheels.
