E55 Brakes on a E500??
One Can bleed the brakes without using the star....Just cycle the sbc pump...
Open a door or pump the brake pedal to cycle the pump....Used OE MB Brake fluid
I Checked for any codes and None were found
Any issues yet? I hope all is fine on the swap? As I just finish the E55 brakes swap to my E500. Lots of work but man it looks cool. I used the motive power bleeder and it works like a charm. so far after a 2 mile drive no fault codes.
greetingz,


https://mbworld.org/forums/classifieds/181327-fs-w211-amg-brembo-brakes-calipers-rotors-ss-lines-2-000-pix.html
Mark
Did you do the 4 piston rears too? Was that just a striaght forward swap? I got the rears and ready to add the four piston rears.

The brakes are Upgraded to the 390MM Front with Eight piston calipers
Rears have the four piston Calipers with matching rotors ...The larger Front Brakes Require 19s for clearance
The Brake Upgrade was done without any Problems...all OE MB Parts used
If You are NOT Sure on what you are doing PLEASE have a MB Tech Do the Work...As SBC Brakes are Not a Item to (PLAY) with!
BTW, AMG brakes are still for sale.
The Best of Mercedes & AMG
The brakes are Upgraded to the 390MM Front with Eight piston calipers
Rears have the four piston Calipers with matching rotors ...The larger Front Brakes Require 19s for clearance
The Brake Upgrade was done without any Problems...all OE MB Parts used
If You are NOT Sure on what you are doing PLEASE have a MB Tech Do the Work...As SBC Brakes are Not a Item to (PLAY) with!
I did the front already, I actually drilled the stock spindle to accept the larger 14mm bolts that bolt the caliper mount to the spindle.
As for the rear, I wondered if you had any tips before I began the job.
Thanks


The brakes are Upgraded to the 390MM Front with Eight piston calipers
Rears have the four piston Calipers with matching rotors ...The larger Front Brakes Require 19s for clearance
The Brake Upgrade was done without any Problems...all OE MB Parts used
If You are NOT Sure on what you are doing PLEASE have a MB Tech Do the Work...As SBC Brakes are Not a Item to (PLAY) with!
BTW, "dropped" you mentioned that you are rolling on 20"s. I am considering putting 20's on my E500 as well, what kind of wheels are you on? Do you have any issue of rubbing or any other problems?





