Wiper noise
Quick update for those reading - After two days in the rain with my new Anco inserts that I painstakingly put in, the noise and chatter is back! I'm guessing I didn't hear it the first day is because I put some wax on my windshield. So, don't do what I did!!

I live in Seattle, so I need to get this fixed ASAP or else i am going to go insane!!
At least that's the way I see it. I don't think there is anything special about MB's windshield glass.
I'm also pretty sure it's not the angle of the wiper arm. The inserts are soft and they will bend away from the direction the arm is traveling as long as the insert is sitting reasonable close to 90 degree.
OEM inserts are just avg. in quality and changing it to a good quality one mostly fixed the problem. I think the remaining issue is the tension of the spring built into the wiper arm. I don't know if there is an easy fix for this.
Last edited by MBE550; Apr 12, 2009 at 09:38 PM.
Try replacing the blades with OEM spec replacements.
Try replacing the blades with OEM spec replacements.

You really need to change blades.
I replaced them with some from Costco @ 12 each. I had to dremel down one edge so the fit would be more snug. If you look at the stock wipers, there is a beveled corner on one side, but on the ones from Costco, there was no beveled edge so I dremeled one side to get the bevel. They've been working fine now for the last couple months (since Jan).
I don't know if it's the same with stock replacements, but these took like two weeks to fit snugly onto the windshield due to the extreme bend out of the box.
Link: http://www.amazon.com/Bosch-4826-Evo...tive&carId=003
The Best of Mercedes & AMG
Has anyone tried to adjust the wiper angle?
Regards,
Peter
Good luck!
Has anyone tried to adjust the wiper angle?
Regards,
Peter
New dealer wiper blades didn't solve it even for a few minutes.
ReSince it makes noises both up and on the down stroke, I figured it isn't the angle.
Peter










