09W211

what it does..i'll be putting on 20mm spacers in the front and 25mm spacers in the rear today. anyone know what size lug bolts i'll have to run for these spacers?

isstay

What brand you are using? I would say that you should add spacer thickness to the bolt length. H&R has spacers that bolt to the hub and the wheels bolt to them using the OEM bolts.

09W211

i'm using titan motorsport 25mm spacers.

isstay

They should have bolts to accompany them.

09W211

i ordered it without bolts because my buddy has a crate full of various different lug bolts (cone, ball, extended, standard, black, chrome, etc.) that i could "borrow"

anyone know what the standard lug bolt sizes are?

09W211

for reference. i have the wheels below in 18" conical seated 28mm?

isstay

I think that they are 12x1.5 not sure how long.

09W211

nah it's 14x1.5, i checked with 44mm spacers and it doesn't seem like it was long enough. only about 5-6 threads were showing when i put the lug bolt through the spacer without mounting wheels.

1.5" = 38.1mm
+ 25mm
=63.1mm

Craftysince86

are you going back to OE wheels?

09W211

nah running OE wheels until my credit for tires come in cuz my front tires bubbled. not getting tires for my wheels cuz i already have credit coming in and i'm gonna get some coils for my girls mustang in a week or so

09W211

ok so i got a 25mm spacer with a CB of 66.56 and it fits snug on the hub, but won't fit in the back of my wheel. according to the vendor, the spacer needs to have a CB of 66.56 in order to fit over the stock hub of 66.5. question is, why dafuq doesn't the spacer fit in the wheel?

Craftysince86

Is the spacer to big or too small? You can get hub rings if the spacer has a smaller center bore... Pic of the spacer?

09W211

spacer's too big. it's just a standard 5x112, 25mm, 66.56 CB, hub centric spacer for the w211 rears from titan wheel accessories or something like that.

**** it, i think im just going to return it and drive hella sunk for a bit

Craftysince86

Is it just the ring spacer or is it the whole hub spacer that covers the entire end of the hub?

09W211

looks like this, but from a different manufacturer
http://www.ebay.com/itm/20mm-HUBCENT...fcf787&vxp=mtr

isstay

You are right they are 14mmx1.5mm, but when I said 1.5 I was referring to the stepping of the threads, or 1.5mm between the ridges not the length of the bolt.