V6 control arms
#1
V6 control arms
Hello,
I am about to install a set of coil overs on my sons 2006 e500. I understand we need to swap the rear control arms to the v6/non-air ride version. I was looking to buy used but cannot find both sides on Ebay. Any other ideas? TIA, Mike
I am about to install a set of coil overs on my sons 2006 e500. I understand we need to swap the rear control arms to the v6/non-air ride version. I was looking to buy used but cannot find both sides on Ebay. Any other ideas? TIA, Mike
#2
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,109
Received 1,744 Likes
on
1,391 Posts
1922 Ford Model T / no OBD
How much are they worth for you?
My local junk yard has 2003 model on the lot. I can go over and pull them for you.
Picture or drawing of needed part would help.
My local junk yard has 2003 model on the lot. I can go over and pull them for you.
Picture or drawing of needed part would help.
#3
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,109
Received 1,744 Likes
on
1,391 Posts
1922 Ford Model T / no OBD
Here is the EPC drawing showing both version of arms.
Officially it is called guide.
You might want the covers as well?
Officially it is called guide.
You might want the covers as well?
#4
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,109
Received 1,744 Likes
on
1,391 Posts
1922 Ford Model T / no OBD
Than you have whole side on ebay for 200 bucks.
Seem all W211 on junk yards have front end damage hmmm....
Seem all W211 on junk yards have front end damage hmmm....
#5
Thanks and sorry for the delay in responding. I have heard the pair go for about $150 used/shipped? I believe I need the version on the left, to allow for the coils, correct? And where are you located?
#6
#7
MBWorld Fanatic!
Join Date: Jan 2009
Location: V E G A S
Posts: 9,109
Received 1,744 Likes
on
1,391 Posts
1922 Ford Model T / no OBD
So between $80 for arm, or $200 for whole suspension you do have choices.
Let me know if you know other parts.
W211 come to the age when they show on pick&pull, so I can get those parts pretty cheap.
Our Bluetec shows driver seat wear, just pulled identical cover from passenger seat on JY for $8.
Bad part without option to move the seat took over 1 hr to get it out.
Let me know if you know other parts.
W211 come to the age when they show on pick&pull, so I can get those parts pretty cheap.
Our Bluetec shows driver seat wear, just pulled identical cover from passenger seat on JY for $8.
Bad part without option to move the seat took over 1 hr to get it out.