Can I Disable Keyless Go Chime?
Huh....what about pressing the reset button on the left of the dash and ....no mo beep
I know thats not creative, but easier than removing the dash.
The "beeper" is the device I was referring to. Maybe you can cover all sides? What happens if you fill it/encapsulate it in silicone sealant? Are there any wires running to it that can be cut or does it plug into a circut board? Does this thing really make you guy's that nuts
No need to remove the dash to get the cluster out or to disassemble it. Takes maybe 5 minutes.

-s-
Cool picture. Have you tried covering/duct taping the holes so the sound is not so loud?

-s-
The Best of Mercedes & AMG
scorchie,
How exactly do you get to the cluster?
2) Loosen two torx T20 screws on each side. These are captive screws so do not remove them!
3) Pull cluster out with hands and unhook connector on back.
If you wish to disassemble the cluster, you can remove the housing by prying on the (five I think) latches that hold the front and rear together. Then the front should come off; you can lift the works out of the rear.
Further disassembly is not recommended unless you are working with a cluster that you don't need, or don't need to drive your car around.
-s-
Nope... I was leaving that up to you.

-s-
Actually the sound is not a big deal to me, I was trying to help those with "beeperitst".



