2006 Mercedes E350 Advice
#28
MBWorld Fanatic!
Join Date: Feb 2014
Location: MA
Posts: 6,152
Received 1,506 Likes
on
1,177 Posts
2008 E350 4Matic, 2011 E350 4matic
Also in addition to the balance shaft, the intake manifold tends to go on the M272 engine. Basically the flaps gets gummed up when the oil separator/oil breather cover goes bad. I'd replace those. Intake is at least $600+ for the intake and 1k+ at the dealer. Goes in the same range, 80-140k. You should it scanned because you can get a pending code before an actual CEL on the intake flap.
The following users liked this post:
tjts1 (07-16-2021)
#29
Also in addition to the balance shaft, the intake manifold tends to go on the M272 engine. Basically the flaps gets gummed up when the oil separator/oil breather cover goes bad. I'd replace those. Intake is at least $600+ for the intake and 1k+ at the dealer. Goes in the same range, 80-140k. You should it scanned because you can get a pending code before an actual CEL on the intake flap.