Key fob outer case replacement
I just received 2 replacement key fob casing for my 2 button cell battery key fob. I've included the link from the AliExpress dealer that I bought them from.
Changing over the PCB is easy. Remove the battery holder from the original fob. Then pull out the PCB just below the lock/unlock buttons. Use a set of needle nose pliers.
Now insert the PCB into the new key fob casing. Then move the 2 batteries across into the new battery holder, then insert the battery holder into the new key fob. Test. Everything should work!!!
Link: https://www.aliexpress.com/item/1005...tml#nav-review
Original case on left. New case on right.
I just received 2 replacement key fob casing for my 2 button cell battery key fob. I've included the link from the AliExpress dealer that I bought them from.
Changing over the PCB is easy. Remove the battery holder from the original fob. Then pull out the PCB just below the lock/unlock buttons. Use a set of needle nose pliers.
Now insert the PCB into the new key fob casing. Then move the 2 batteries across into the new battery holder, then insert the battery holder into the new key fob. Test. Everything should work!!!
Link: https://www.aliexpress.com/item/1005...tml#nav-review
Original case on left. New case on right.
Great idea anyway, I have repaired many of the Gen 2 SmartKeys when they got wet with cracked buttons. Wet finger wicks rain/coffee/beer inside too well.






