Bulletins 207 coupe & 212 sedan
2009-2016 OM642 & OM651 Diesel Vehicles Extended Modification Warranty for each vehicle that has received the Approved Emission Modification. The EMW period is the greater of: 10 years/120,000 miles from the date of initial sale whichever occurs first; or 4 years/48,000 miles from the date of installation of the Approved Emission Modification whichever occurs first. If an owner already paid to a have a repair performed related to any of the covered components prior to the effective date of EMW those repairs are not eligible for reimbursement.




Here is the site with details.
https://www.epa.gov/enforcement/daim...vil-settlement
Good question for other countries is will MB voluntary extend the modifications past US borders?
Long dispute about it in diesel section.
Last edited by kajtek1; Mar 25, 2021 at 11:19 PM.
This is probably a stupid question, but I recently purchased a 2010 E350 with faded walnut trim. Is there any chance a dealer will help me out replacing the trim per the service bulletin? I think I know the answer, but ... Thanks!
With that said, you can order ANY PART from your dealer for an Mercedes vehicle. And since that car is more than 10 years old, that part will be VERY expensive.
I had a friend who owned a 1964 280SL.
He got into a fender bender and destroyed his front grill.
His MB dealer said they could get him the exact same grill for his car... for $12,500.
Good luck.
.
Last edited by Paxfobiscum; May 4, 2021 at 10:19 AM.
The Best of Mercedes & AMG
On that note, can you please check if my cars engine is within the engine range specified in the attached TSB?
My vin is WDDHF8JB8CA550230
I feel my car might be impacted by this documented timing chain tension issue.
Thanks kindly!




On that note, can you please check if my cars engine is within the engine range specified in the attached TSB?
My vin is WDDHF8JB8CA550230
I feel my car might be impacted by this documented timing chain tension issue.
Thanks kindly!
If the link is legit, I wonder if it should be part of the tools in the forum.
Also, this video is worth watching to know what is involved
Last edited by JCM_MB; Sep 23, 2021 at 11:39 AM.








