Does anyone know of any cool hacks for the new E class?

I have been reading these forums for a number of weeks before the purchase so thanks again to all the knowledgeable folks on here
I took delivery of a 2010 E250 sport on Friday, have to say the car is a joy to drive. One thing that is bugging me is I cannot seem to activate blue-tooth audio streaming as suggested. I have the audio 20 and I can get into the engineering mode fine but I don't see the options other people see. The entire menu structure is different. It look's the same as the first set of screen shots on this thread:-
http://www.benzworld.org/forums/w212...u-11-w212.html
Do you think I need the dealer to update the firmware or is there a different way to enable streaming with this version of engineering menu ?
Thanks for the help
https://mbworld.org/forums/4545064-post4.html
The dealer tested it with non-jailbrake iphone and Blackberry. My Iphone 4 is with iOS 4.2 with jailbrake. All are working okay. No need to do anymore authorization/de-authorization. What you need is to update the command software. In my case is to version:00090267606-001.
Good Luck.
The setup described here worked for me but when I am streaming music I am unable to connect the Phone via bluetooth. It seems like I can have 1 or the other at a time only. Any advice ? Is it a COMMAND version issue?
I am driving a 2010 E550
I guess i would firstly need to identify what version I am running on currently and what version i need to get to, so back to square one. How do I identify what COMMAND version I am running ?
The Best of Mercedes & AMG
Anywho ... dropped off the car with that complaint this morning and still waiting on a call back. How do I check what COMMAND version I am running ?




I guess i would firstly need to identify what version I am running on currently and what version i need to get to, so back to square one. How do I identify what COMMAND version I am running ?
I posted this already somewhere in this forum but here it is again. This is a good reason to ask for the COMAND upgrade as it is an easy way to show the original software indeed does not work correctly.
When you use the NAVI and enter a POI as an address you see on the bottom of the screen tabs. The one on far left says MAP. In the original software version this tab is grayed out, i.e. it does not work.
What you should be able to do is to roll on the MAP tab and select it. This would show your chosen address on the map before you actually select it as your target address.
Above is very helpful when you are traveling on highway to your destination. Sometimes you want to make a stopover and when selection one, like a gas station, you can look at the location via the MAP tab before actually selecting it as the stop like to see how far the stop is from your route.
I had this problem with both my 2011 E350 and current 2010 E550 and both of them got fixed by the COMAND software upgrade not to mention other improvements like voice quality on phone.








Read my post earlier in this thread. You can show them that it does not work as it is meant to be. You should be able to select the MAP tab bottom left to look at your destination before you actually select it as one. Before update it does not work, after does.
Read my post earlier in this thread. You can show them that it does not work as it is meant to be. You should be able to select the MAP tab bottom left to look at your destination before you actually select it as one. Before update it does not work, after does.
Not that I think it should work this way, but I guess it makes a little sense if it does...

Another thing I have experienced with my Nokia N8 is array of tracks is all the way different that it does with bluetooth audio , same goes for mp3 player too . I don't think Iphone is ever different either
Not that I think it should work this way, but I guess it makes a little sense if it does...




What you should be able to do is to roll on the MAP tab and select it. This would show your chosen address on the map before you actually select it as your target address.
Thanks, but what happens if you just enter an address? Does it have to be a Point of Interest?
Also, does it matter if you do it manually or by voice?
. but i'm just too chicken to try
.





