Replacing the front ashtray
12-28-2009, 11:56 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
Replacing the front ashtray
Just brought home our new E Class. Initial impressions are very positive.
Is anyone aware of an aftermarket replacement for the front ashtray to convert it to a coin holder or smaller tray? The coin holder in the glove box seems like a joke.
Is anyone aware of an aftermarket replacement for the front ashtray to convert it to a coin holder or smaller tray? The coin holder in the glove box seems like a joke.
12-29-2009, 02:23 AM
#2
Member
Join Date: Oct 2009
Location: Los Angeles
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
2015 C300 4Matic
12-29-2009, 02:29 AM
#3
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,340
Received 293 Likes
on
245 Posts
223.168 & 213.012 & 906.633 & 214.005
A car with a non-smoker package (standard in Europe) comes without a cigarette lighter but with a power connector and a mat in the "ash-tray".
http://www4.mercedes-benz.com/manual...html#d13e59163
http://www4.mercedes-benz.com/manual...html#d13e59163
12-29-2009, 07:26 AM
#6
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
I can't seem to find the part listing for European models. I did speak to my dealer about this last night when going over the car. I did PM "Konigstiger" as well.
If enough people are interested, maybe we can set up a bulk buy from Europe if that is the source.
12-29-2009, 08:44 AM
#7
MBWorld Fanatic!
Join Date: Nov 2009
Location: Southeastern USA
Posts: 2,572
Received 143 Likes
on
102 Posts
2010 E350 Luxury Sedan, Engine 272 (V6)
Removing ashtray
On my last car, I just took out the metal cigarette holder and then lined the bottom with a piece of sticky on one side felt. Worked great and when I sold the car, I took out the felt, used a little Goof Off to remove the residue and poped the cigaretter holder back in.
On my E, I just dropped the coins in and have no problems. No rattles or anything and the opening is big enough to reach in and get the coins out.
On my E, I just dropped the coins in and have no problems. No rattles or anything and the opening is big enough to reach in and get the coins out.
Trending Topics
12-29-2009, 09:03 AM
#8
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
On my last car, I just took out the metal cigarette holder and then lined the bottom with a piece of sticky on one side felt. Worked great and when I sold the car, I took out the felt, used a little Goof Off to remove the residue and poped the cigaretter holder back in.
On my E, I just dropped the coins in and have no problems. No rattles or anything and the opening is big enough to reach in and get the coins out.
On my E, I just dropped the coins in and have no problems. No rattles or anything and the opening is big enough to reach in and get the coins out.
I think I'll pursue this avenue. This is why I love forums.
Edit: After some thought, I guess I could take an old mouse pad and cut it to fit the compartment with the ashray removed. That would give a nice, cushioned area provided the pad is not too thick.
Last edited by Steeler Nation; 12-29-2009 at 10:27 AM.
12-29-2009, 02:20 PM
#9
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,340
Received 293 Likes
on
245 Posts
223.168 & 213.012 & 906.633 & 214.005
You have a nice new W212, please order the OEM mat from your dealer, your car deserves it and you would not upset fellow MB owners who visit your car.
12-29-2009, 03:15 PM
#10
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
12-29-2009, 04:47 PM
#11
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,411 Likes
on
3,144 Posts
'71 Pinto
In following DB’s post, it looks as though part #2128130002 may be the ashtray replacement (#200 in diagram – ashtray stowage compartment, center console). Possibly European members can recommend a source for confirmation/purchase.
01-01-2010, 06:23 PM
#12
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
Simple solution
So I feel pretty silly about this. 
I took the ashtray out of the car. Examining it demonstrated that the metal frame was just clipped on. I popped of the frame, glued a piece of photo paper into the dish, and popped it back in. Voila. instant coin, cell phone tray. Simple solution to a simple problem.
Its all original equipment too, so no other MB owner who sits in my car will get upset.
I took the ashtray out of the car. Examining it demonstrated that the metal frame was just clipped on. I popped of the frame, glued a piece of photo paper into the dish, and popped it back in. Voila. instant coin, cell phone tray. Simple solution to a simple problem.
Its all original equipment too, so no other MB owner who sits in my car will get upset.
01-02-2010, 09:51 AM
#15
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
As far as it not being official MB paper, I created my own bootleg paper by printing a silver MB star on the paper. You just take a 4x6 size card and cut it about half. I'm good to go...
01-02-2010, 11:06 AM
#16
Senior Member
Join Date: Nov 2009
Location: NY
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
2010 E550 4matic, 2008 MDX, 2011 335i Vert
01-02-2010, 11:18 AM
#17
Newbie
Join Date: Dec 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2010 E350
huh! learned something new. Thanks for the tip on popping off the metal cover. maybe I'll take a trip to the local store to buy some felt. However, knowing how I am, I'll probably just end up leaving the coins in there to rattle around.
01-02-2010, 06:07 PM
#18
Senior Member
Join Date: Nov 2009
Location: NY
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
2010 E550 4matic, 2008 MDX, 2011 335i Vert
Thx for the recommendation!!! I popped mine off today. Was great for holding the keys as well as my iPhone. No meaningful rattles even with no paper or felt in there.
01-03-2010, 04:40 PM
#20
Member
Join Date: Oct 2009
Location: Los Angeles
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
2015 C300 4Matic
you can use the loop side of velcow(the soft part) and cut it pretty damn close to perfect fit in about 2 minutes flat. threw my quarters back in and its super quiet, looks fantastic.
01-03-2010, 08:48 PM
#21
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
01-06-2010, 12:33 AM
#22
Newbie
Join Date: Dec 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2010 E350
O.k., it took me a little more than 2 minutes flat, but I went to Michaels arts and crafts store. Picked up a sheet of black felt for $1.49. The felt has adhesive backing to it. I spent about 15 minutes cutting the pieces out and sticking it to the tray. I was even able to cut out a hole for the light. Any parts that had gaps between the felt panels, I just shoved in thin pieces of felt.
It looks seamless now and pretty professional. It's not as squishy as velcro, but it works for me. We'll have to see about the noise.
Great solution pulling the metal top off!
It looks seamless now and pretty professional. It's not as squishy as velcro, but it works for me. We'll have to see about the noise.
Great solution pulling the metal top off!
01-08-2010, 03:31 AM
#23
MBWorld Fanatic!
Join Date: Sep 2008
Posts: 4,336
Likes: 0
Received 7 Likes
on
7 Posts
Porsche 991S, Cayenne S, 1972 BMW 3.0CS E9 Coupe
Sounds like some good solutions until MB comes out with a W212 rubber pad like they did for the W211.
But instead of velcro, or arts and crafts materials, etc.., why not use real automotive moleskin like you see in, well, cars.
You can get it at auto body supply stores. Or get it here: http://www.tintprotector.com/strips/index.htm
But instead of velcro, or arts and crafts materials, etc.., why not use real automotive moleskin like you see in, well, cars.
You can get it at auto body supply stores. Or get it here: http://www.tintprotector.com/strips/index.htm
01-08-2010, 07:19 AM
#24
Junior Member
Thread Starter
Join Date: Dec 2009
Location: Pittsburgh
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2010 EClass 350 Sport 4Matic
So if its not OEM, its CRAAP!! (insert Scottish accent)
