Taking Off Head Rest In E350
#1
Senior Member
Thread Starter
Join Date: Mar 2005
Posts: 437
Likes: 0
Received 4 Likes
on
3 Posts
Lexus LS 400, 2008 BMW 528i, 2014 e250 BlueTec
Taking Off Head Rest In E350
Anybody know how to take off headrest. I need to take them off to install sheep skin seat cover made for E350. Dealer is asking $145 for the job.
Any help please.
Any help please.
Last edited by Raymond Lee; 02-03-2012 at 10:11 AM.
#3
MBWorld Fanatic!
Make sure they are installed so that the air bag does not go off inside the sheepskin god forbid there was an accident...
#6
MBWorld Fanatic!
This is weird
Everyone is entitled to their opinion so if you will be happy with that stuff and go for it
Everyone is entitled to their opinion so if you will be happy with that stuff and go for it
#7
MBWorld Fanatic!
Join Date: Apr 2004
Location: Valley of the Sun, Arizona
Posts: 1,794
Likes: 0
Received 3 Likes
on
2 Posts
2011 E550, 2013 GLK
I've had MB sheepskins on a 190D I drove for 17 years and they've been on my 20 year old 300E from the day I bought it. They've kept us warm in Minnesota winters and cool in Arizona summers.
My new E550 with seat heaters and ventilation but it's not the same.
Don't knock 'em if you haven't tried them (good ones of course).
My new E550 with seat heaters and ventilation but it's not the same.
Don't knock 'em if you haven't tried them (good ones of course).
Trending Topics
#8
MBWorld Fanatic!
Join Date: Mar 2005
Location: Toronto
Posts: 2,034
Likes: 0
Received 18 Likes
on
15 Posts
MY17 E43 Matte Selenite/Macchiato Beige, MY16 GLE350d Tenorite/Crystal Grey, MY17 B250
Extend the headrest fully with the power controls and then pull straight out. You will have to recline the seat somewhat, obviously.
#9
Senior Member
Thread Starter
Join Date: Mar 2005
Posts: 437
Likes: 0
Received 4 Likes
on
3 Posts
Lexus LS 400, 2008 BMW 528i, 2014 e250 BlueTec
YYZ-E55
Thank you so very much. I must not be doing something right. I had headrest all the way up and tried to pull it but something was catching it. Any Idea? my car is 2012 E350 Bluetec.
Thank you so very much. I must not be doing something right. I had headrest all the way up and tried to pull it but something was catching it. Any Idea? my car is 2012 E350 Bluetec.
#10
Super Member
I am sure this doesn't apply anymore but on my '87 E-class i distinctly remember there being a button in the middle of the back of the front seats to push once you pull the headrest all the way up LOL.
The manual doesn't offer any help I assume?
Raymond can you post pics when you are done? I always to thought the grey sheapskins in the '80s looked good but never got them with the leather. The new one's looks weird now as they are airbag compatible I think but seen some pics on GLs on the forum which don't look too bad. Now that I have MBText though I may consider for the summer to keep my back cooler?
The manual doesn't offer any help I assume?
Raymond can you post pics when you are done? I always to thought the grey sheapskins in the '80s looked good but never got them with the leather. The new one's looks weird now as they are airbag compatible I think but seen some pics on GLs on the forum which don't look too bad. Now that I have MBText though I may consider for the summer to keep my back cooler?
#11
Super Member
Join Date: May 2010
Location: So. Cal.
Posts: 672
Likes: 0
Received 3 Likes
on
3 Posts
Current: 2011 W212 Previous: 2008 W211 2006 550 2001 Rover 1997 W210
Not sure how easy a job it would be, but because the headrest is controlled electronically, it probably isn't as easy as just pulling it out...
#13
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
#15
Senior Member
Thread Starter
Join Date: Mar 2005
Posts: 437
Likes: 0
Received 4 Likes
on
3 Posts
Lexus LS 400, 2008 BMW 528i, 2014 e250 BlueTec
I found a custom made Australlian sheepskin cover made for E350. It does not require taking headrest off to install the seat. E350 headrest is attached to motor and it is a big job to take headrest off by dealer, a cost to run as high as over $200.
With this, rather hard MB tex seat issue is gone! With a thick plush sheepskin, it feels good to seat on.
With this, rather hard MB tex seat issue is gone! With a thick plush sheepskin, it feels good to seat on.
#16
Super Member
I found a custom made Australlian sheepskin cover made for E350. It does not require taking headrest off to install the seat. E350 headrest is attached to motor and it is a big job to take headrest off by dealer, a cost to run as high as over $200.
With this, rather hard MB tex seat issue is gone! With a thick plush sheepskin, it feels good to seat on.
With this, rather hard MB tex seat issue is gone! With a thick plush sheepskin, it feels good to seat on.
THanks!
#17
Senior Member
Thread Starter
Join Date: Mar 2005
Posts: 437
Likes: 0
Received 4 Likes
on
3 Posts
Lexus LS 400, 2008 BMW 528i, 2014 e250 BlueTec
Mbenz260e
Here it is: www.autoanything.com
This place is located in San Diego and its supplier is located somewhere in San Diego also.
Here it is: www.autoanything.com
This place is located in San Diego and its supplier is located somewhere in San Diego also.
#19
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
#20
MBWorld Fanatic!
I too looked at the manual for confirmation.
They don't
#21
Super Member
On mine, one does and two do not. It must've accidentally gotten switched at some point during its life.
Wonder what the tilt one is from?! Maybe an older or newer E?
Thx for the education! If and when the time comes to replace it, I'll know how to remove it! Ha.
Wonder what the tilt one is from?! Maybe an older or newer E?
Thx for the education! If and when the time comes to replace it, I'll know how to remove it! Ha.
#22
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
"Taking Off Head Rest in E350" is the thread subject, attachment benefits the membership while clearly answering your question.
Last edited by konigstiger; 10-11-2014 at 11:35 AM.
#23
could you PM me the instructions also? I need to remove the Driver side front head rest - seems something's broken inside it... i can see broken plastic in the popped out section. Car was parked but we've been having very hot weather here lately. maybe the plastics got weakened?
#24
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,440 Likes
on
3,153 Posts
'71 Pinto
Update profile - model year, model, etc.
#25
MBWorld Fanatic!
Join Date: Jun 2013
Location: Sacramento , CA
Posts: 1,900
Received 197 Likes
on
172 Posts
2010 e550 p2
hello.
could you PM me the instructions also? I need to remove the Driver side front head rest - seems something's broken inside it... i can see broken plastic in the popped out section. Car was parked but we've been having very hot weather here lately. maybe the plastics got weakened?
could you PM me the instructions also? I need to remove the Driver side front head rest - seems something's broken inside it... i can see broken plastic in the popped out section. Car was parked but we've been having very hot weather here lately. maybe the plastics got weakened?