Help with 20" to my E-Class Estate!
#1
Member
Thread Starter
Help with 20" to my E-Class Estate!
Have problem choosing 20" to my MB s212 (estate)
Want the Vossen CV3 but they say they wont fit
Please come with suggestion
Want the Vossen CV3 but they say they wont fit
Please come with suggestion
#3
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,695
Received 3,421 Likes
on
2,859 Posts
2012 CLS63
they(Vossen) keep saying cv3's will come in 19's soon, I know several cats, including myself, that want a set too, I've had some mandrus that were nice, have stock right now, as well as Vossens....
good luck duder
good luck duder
#5
Member
Thread Starter
Thanks guys.
I will have to wait a bit and for the 2012 models. Vossen is not easy to get in touch with. No dealer in Norway
Someone seen OZ Raffaello on MB 212?
I will have to wait a bit and for the 2012 models. Vossen is not easy to get in touch with. No dealer in Norway
Someone seen OZ Raffaello on MB 212?
#6
MBWorld Fanatic!
I've had now discontinued OZ Giotto in 20" (very similar looking 2pc wheel to Raffaello's 3pc). IMO wheels looked smaller (but now I actually regret selling them as they did look stunning) than they actually were (Raffaello looks even "smaller" or more fragile due to thiner spokes). If you're in that league ($$$) might as well look at HREs.
#7
Former Vendor of MBWorld
Thanks for thinking about us! Different size 20's arrive in May for better Fitment . 19s are a go and should be here in summer.
The W212 enthusiasts are on our minds!
The W212 enthusiasts are on our minds!
Trending Topics
#8
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,695
Received 3,421 Likes
on
2,859 Posts
2012 CLS63
damn, summer is a long time Mike, lol.......
#11
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,695
Received 3,421 Likes
on
2,859 Posts
2012 CLS63
no doubt; good point about winter.....
somebody else will probabaly have something
similar soon.....
supply and demand......
somebody else will probabaly have something
similar soon.....
supply and demand......
#12
MBWorld Fanatic!
Join Date: Sep 2008
Location: Bergen Co,NJ
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
14' CLS550
Im shopping around for a set of 20's and im very disapointed that all the wheels I like arent available in our fitment. Im told anywhere from 4-8 weeks.. Im no expert but shouldnt these companies be ready to release wheels by mid march the latest. When they say 4-8 weeks theres no guarantee.
#14
Member
Thread Starter
OK! Like some say, summer is a looong time!
I would have bought CV3 by now if they would fit my car.
I need wheels to mid april. Someone has experience with "STANCE WHEELS", is that the same as Vertini?
=)
I would have bought CV3 by now if they would fit my car.
I need wheels to mid april. Someone has experience with "STANCE WHEELS", is that the same as Vertini?
=)
#15
Member
Thread Starter
Can someone please tell me if this would fit my S212?
http://www.ebay.com/itm/20-Stance-SC...b446ca&vxp=mtr
Thank you! =)
http://www.ebay.com/itm/20-Stance-SC...b446ca&vxp=mtr
Thank you! =)
#16
Member
Thread Starter
What do you guys think about the Kleemann TS-7 in 20" on a 212?
What offset do I have to run? Somebody with some pics of them on a 212?
What offset do I have to run? Somebody with some pics of them on a 212?
#17
Member
Thread Starter
Done thinking!
http://www.mbscashopen.se/se/article...0&fullheight=0
Hope these will look great on my new car =)
Somebody have pix of them on a 212?
http://www.mbscashopen.se/se/article...0&fullheight=0
Hope these will look great on my new car =)
Somebody have pix of them on a 212?
#19
Member
Thread Starter
Not easy to get concave when the offset on the rear wheel is so high. I look`d for a concave wheels set, but didn`t find something liked, accept for the CV3.
Vossen will make CV3 fit not only the E63, but also the other 212`s in the summer.... I can`t wait to the summer
#20
MBWorld Fanatic!
Join Date: Sep 2008
Location: Bergen Co,NJ
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
14' CLS550
Im going to disagree.. i have 10" wide rears at 40et and im very happy with the concavity.. the front are a different story. 8.5" wide with 35et not concave at all.. maybe if you can pull off 9" in the front at like 40 et it will work and be slightly more concave. but you will need to stretch the tire with a 9" wheel if your going to lower the car. look into Vertini monaco, rohanna wheels has a new concave line.
#21
Member
Thread Starter
Im going to disagree.. i have 10" wide rears at 40et and im very happy with the concavity.. the front are a different story. 8.5" wide with 35et not concave at all.. maybe if you can pull off 9" in the front at like 40 et it will work and be slightly more concave. but you will need to stretch the tire with a 9" wheel if your going to lower the car. look into Vertini monaco, rohanna wheels has a new concave line.
I actually was thinking about the Vertini Monaco, but the dealer in Norway coulldt get it this year :/
I think the wheels i have ordered would be nice on the car
#22
MBWorld Fanatic!
Join Date: Sep 2008
Location: Bergen Co,NJ
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
14' CLS550
I have Eurotek 06 wheels all black.. made by mrr wheels.. i just put them on yesterday.. by the time i was done it was dark out, no photos yet, they are a concave open mesh style. I like them but honestly i believe a more open wheel, like a 5 or 6 spoke concave would look the best! Stance sc-5 also.. The wheels i am mentioning are on the cheaper side.. 2000-2500 wheel/tires.. if you want to spend the $ you can go with a 3 piece forged and the possibilities are endless
#23
Member
Thread Starter
I have Eurotek 06 wheels all black.. made by mrr wheels.. i just put them on yesterday.. by the time i was done it was dark out, no photos yet, they are a concave open mesh style. I like them but honestly i believe a more open wheel, like a 5 or 6 spoke concave would look the best! Stance sc-5 also.. The wheels i am mentioning are on the cheaper side.. 2000-2500 wheel/tires.. if you want to spend the $ you can go with a 3 piece forged and the possibilities are endless
The stance sc-5 are great also! Think it will be a set of Vossen next year!
Still waiting for my car! Cant't wait! Will be in my garage in 3-4 weeks!
#24
MBWorld Fanatic!
Join Date: Sep 2008
Location: Bergen Co,NJ
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
14' CLS550
Good luck man.. I personally dont like vossens new line, also i was looking for all black wheels witch they dont have. Obviously everyone has different taste.. Another problem was vossen isnt going to come out with there new wheels till july/august (i find that way too long of a wait) I did realize that w212 fitments are limited.
#25
Member
Thread Starter
Good luck man.. I personally dont like vossens new line, also i was looking for all black wheels witch they dont have. Obviously everyone has different taste.. Another problem was vossen isnt going to come out with there new wheels till july/august (i find that way too long of a wait) I did realize that w212 fitments are limited.
I'm so lucky to actually work at Mercedes in Norway as a mechanic! Have alot of experience with them, but most on the diesel models
If you need som diy etc, let me know
Thanks for help!