When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am trying to setup audio Bluetooth in my Mercedes E class 2011 W212. Once I get in to engineering mode, my usual toggle isn’t letting me navigate through the options. I have attached pictures of the menu I am getting. Any ideas?
Entered engineering mode but won't let me exit. Even after hitting END or turning unit off. After 45 seconds of radio on goes back to engineering mode, also tried holding the red, 1 & # for 10-15 seconds nothing.
I am a member of one of the most helpful sites and came across something called ENGINEERING MODE and digged up what it was about .I have to say that I am puzzled because I learnt that you could change some sueful features thru your COMAND .
So, I will send you some images therefore you can easily see how to enter this mode and use it
To enter this mode, you need to do these simultaneously :
red phone button , 1 ,# .Press these at the same time and hold them 10 secs . You can gain access bluetooth, phone ,TA,radio functions and settings .
The image below shows phone settings :
This image below is about system settings :
Now, this is about phone volume level , if you think your phone volume is too low , you may need to use these settings :
This image below shows earphone settings , you can change them if you like .
This is about equalizer :
Do you still have dese photos
This image below is about listening to music thru your phone's bluetooth connection :
