19x9.5 38et and 19x10.5 32et Will this Fit???
The following users liked this post:
Kai Takase (06-24-2019)
#31
MBWorld Fanatic!
Running 19x11 in the rear and they fit nicely.
#33
Senior Member
Join Date: Jun 2013
Location: Los Angeles, CA
Posts: 284
Likes: 0
Received 15 Likes
on
13 Posts
MB W212, MB W218, BMW F06, BMW F48
My car is 4matic and lowered on H&R springs. I'm currently running F19x8.5+23 and R19x9.5+26 wrapped on F245/35 and R275/30. So far so good, the front only rubs when I hit a big dip or something.
OP's ideal wheel spec should be fine as long as you don't run bigger than f245/ r275 .
OP's ideal wheel spec should be fine as long as you don't run bigger than f245/ r275 .
Last edited by Hsg08; 05-29-2017 at 08:14 PM.
The following users liked this post:
scrowley (05-27-2017)
#34
MBWorld Fanatic!
Anymore pics would love to see more.
#36
MBWorld Fanatic!
#37
Well, actually I'm running now 9.5" at all four corners(e550w4) with 255/35-19 tires. I'm running et42 upfront and wheel/tire sticks out by 3mm (et45 would be flush but would rub on the inner strut) when measured but is not really visible and appears flush; and et35 rear and wheel/tire are flush (due to a slight stretch of 255 tire on 9.5" wheel). Since one should run a correct tire size (which 235/35-19 is not for W212 and especially not for 9.5" wide wheels since it would be narrower than the wheel) and not the one that "fits", any lower front offset than et42 for 9.5" which corresponds to et36 for 9" will result in visible tire/wheel combo being passed the fender line.
#40
Newbie
Join Date: Jul 2019
Location: Pittsburgh, Pa.
Posts: 8
Received 0 Likes
on
0 Posts
E350 4matic
Hi everyone,
Read through the thread and appreciate all of the helpful advice I have a '14 350 4matic with stock suspension and I have a opportunity for a deal today on 4-19x9.5 with 35mm offset it appears to me that this will stick out about a inch past the stock setup(17x 8.5) if the calculations are correct? My two questions are should i definitely use 255 35 19 all around and has anyone experience rubbing with this setup?
Read through the thread and appreciate all of the helpful advice I have a '14 350 4matic with stock suspension and I have a opportunity for a deal today on 4-19x9.5 with 35mm offset it appears to me that this will stick out about a inch past the stock setup(17x 8.5) if the calculations are correct? My two questions are should i definitely use 255 35 19 all around and has anyone experience rubbing with this setup?
#42
MBWorld Fanatic!
Hi everyone,
Read through the thread and appreciate all of the helpful advice I have a '14 350 4matic with stock suspension and I have a opportunity for a deal today on 4-19x9.5 with 35mm offset it appears to me that this will stick out about a inch past the stock setup(17x 8.5) if the calculations are correct? My two questions are should i definitely use 255 35 19 all around and has anyone experience rubbing with this setup?
Read through the thread and appreciate all of the helpful advice I have a '14 350 4matic with stock suspension and I have a opportunity for a deal today on 4-19x9.5 with 35mm offset it appears to me that this will stick out about a inch past the stock setup(17x 8.5) if the calculations are correct? My two questions are should i definitely use 255 35 19 all around and has anyone experience rubbing with this setup?
The following users liked this post:
Germanlove4ever (04-29-2020)
#44
I'm thinking of putting on this set up. Will these fit my 2011 e350 bluetec sport pkg? Can anyone please help with your opinions. Much appreciated.
19x9 et25
10.5x20 et57
19x9 et25
10.5x20 et57
#45
www.willtheyfit.com
This is your best friend when figuring wheel offsets and tire sizing. Plug in your current wheel specs, followed by what you're thinking for the new set and it'll give you every measurement you need. Break out the tape measure and see if it works.
This is your best friend when figuring wheel offsets and tire sizing. Plug in your current wheel specs, followed by what you're thinking for the new set and it'll give you every measurement you need. Break out the tape measure and see if it works.
The following users liked this post:
pierrejoliat (04-23-2021)
#46
Super Member
threeMB's this is my first post and excited to be on the forum! I have a 14 e350 coupe and the oem offset is et48. I'm looking to buy 19inch 9.5's all around and the offsets are +25 front and +31 rear. the rims are 114.3 so i will have to buy adapters...The smallest I've seen is 15mm. Will these wheels fit in any way or will they rub on the fender? Seems like they will stick out a little.
just wanted to add, "Spacers are bad, M'kay?!?"
Last edited by nota_amg; 04-29-2020 at 07:15 PM.
#47
Newbie
Join Date: Jul 2019
Location: Pittsburgh, Pa.
Posts: 8
Received 0 Likes
on
0 Posts
E350 4matic
Definitely a great go to website! I have a '14 e350 4matic with stock 245/45/17's and bought 19x8.5 et38 for the fronts and 19X 9.5 ET40 for the rears can i get recommendations for rear tire size? thought about 265/35/19 or 275/30/19? Thanks!
Last edited by Germanlove4ever; 04-29-2020 at 07:31 PM. Reason: needed to add more.
#48
Super Member
if so, 255's or 265's
if not, you can go with 275's or 285's in the rear
ultimately, overall tire size dictates usability, as 2 brands of the same exact size will have different outer dimensions
Last edited by nota_amg; 04-29-2020 at 07:43 PM.
The following users liked this post:
pierrejoliat (04-23-2021)
#49
Newbie
Join Date: Jul 2019
Location: Pittsburgh, Pa.
Posts: 8
Received 0 Likes
on
0 Posts
E350 4matic
Not lowered so probably going to go with 275's as long as the don't stick out much but fill the arches up.