LED Headlights
As I'm trying to schedule the remote coding I ask for instructions on how to connect the harness The response was "it's self - explanatory." Well, there's the 1 connector I don't know what to do with.
"You need a height level sensor" if not equipped with airmatic (for the auto leveling feature).
Well now I have ordered the height level sensor
Oh and for the coding, "contact so-and-so via Skype Tell him I sent you."
Slowly getting there...








In my case, I can have all ILS features fully functioning but since my car isn't equipped with the "stereo camera" on the windshield for park assist or whatever it does, I won't be able to activate the auto high beam feature. Everything else is supposed to work, including auto leveling.
In my case, I can have all ILS features fully functioning but since my car isn't equipped with the "stereo camera" on the windshield for park assist or whatever it does, I won't be able to activate the auto high beam feature. Everything else is supposed to work, including auto leveling.
Last edited by LILBENZ230; Jan 6, 2020 at 06:21 PM.




The Best of Mercedes & AMG




Last edited by EuroDriverSD; Jan 10, 2020 at 07:44 AM.
Just want to update some info after installed the DEPO LED headlight. At first, I got the same problem that EuroDriverSD mentioned before(Error message and the right side headlamp stays on after ignition off). I talked to the DEPO manufacture in Taiwan and tried to figure out this issue. The DEPO engineer said this issue was caused by the "LED DRIVER" so they sent this chip to the seller and had them install on the new DEPO headlight assembly.The seller was really nice and did the replacement for me right away. Now, the headlight runs pretty well and no error so far.
Last edited by ninjabanana; Jan 30, 2020 at 11:10 PM.
Foreground
Low beams
High beams
Spread
Here's the after:
The new look
Low beams
A little streaking, weird yellow U-shaped pattern in the foreground
On the road.
Just want to update some info after installed the DEPO LED headlight. At first, I got the same problem that EuroDriverSD mentioned before(Error message and the right side headlamp stays on after ignition off). I talked to the DEPO manufacture in Taiwan and tried to figure out this issue. The DEPO engineer said this issue was caused by the "LED DRIVER" so they sent this chip to the seller and had them install on the new DEPO headlight assembly.The seller was really nice and did the replacement for me right away. Now, the headlight runs pretty well and no error so far.








The only situation where I would consider this is if both of your headlights are damaged and need replacement and your insurance refuses to pay for a brand new replacement but will only offer used / refurbished ones for replacement.
BTW I know a Ford dealer mechanic who recently saw a F 150 that had LED's modded in by the owner, the heat sink fans failed and the headlight housings (plastic) melted. Very expensive fix due to cost of new housings.




I finally installed the headlights and had the car coded this morning (the coding tech is in Germany and with the 9 hour difference, I had to get up at 4am to do it - sigh).
The good news is the that the lights work - everything seems to be operational. I have dancing movement at startup, auto on at dusk, low beams, high beams, turn signals, etc. The bad news is that I have a "active headlamps inoperative" message in the cluster. Tech said there is a problem with both the left and right led modules. He asked me to recheck the wiring.
I doubt that I have a bad connection but I plan to take it apart tonight to double - check. Also find it suspicious I got 2 bad modules (all 4 are new)
I'll post updates and pics - I haven't had a chance to see them at night yet
[Quick edit]
I got around to testing them last night and by golly they are niiiice! The Depos have nothing on these! Granted, the OEMs are an option at a very steep premium.
I did notice that when I start the car, sometimes the lights dance and sometimes they don't - not sure if they're supposed to do their dance every time or if this is due to the error code I have.
Here's some pics
ILS car off
ILS DRL's
ILS low beams
Last edited by EuroDriverSD; Feb 4, 2020 at 11:53 AM.
I finally installed the headlights and had the car coded this morning (the coding tech is in Germany and with the 9 hour difference, I had to get up at 4am to do it - sigh).
The good news is the that the lights work - everything seems to be operational. I have dancing movement at startup, auto on at dusk, low beams, high beams, turn signals, etc. The bad news is that I have a "active headlamps inoperative" message in the cluster. Tech said there is a problem with both the left and right led modules. He asked me to recheck the wiring.
I doubt that I have a bad connection but I plan to take it apart tonight to double - check. Also find it suspicious I got 2 bad modules (all 4 are new)
I'll post updates and pics - I haven't had a chance to see them at night yet




That being said,make sure you don't have a connector or plug turned upside down and be sure all of your grounds are good. These systems depend on good grounding
Good luck with the job, I hope you get it sorted out




That being said,make sure you don't have a connector or plug turned upside down and be sure all of your grounds are good. These systems depend on good grounding
Good luck with the job, I hope you get it sorted out
You saying that yours do not calibrate even after the car has sat overnight? If so something is not right.
I finally installed the headlights and had the car coded this morning (the coding tech is in Germany and with the 9 hour difference, I had to get up at 4am to do it - sigh).
The good news is the that the lights work - everything seems to be operational. I have dancing movement at startup, auto on at dusk, low beams, high beams, turn signals, etc. The bad news is that I have a "active headlamps inoperative" message in the cluster. Tech said there is a problem with both the left and right led modules. He asked me to recheck the wiring.
I doubt that I have a bad connection but I plan to take it apart tonight to double - check. Also find it suspicious I got 2 bad modules (all 4 are new)
I'll post updates and pics - I haven't had a chance to see them at night yet
[Quick edit]
I got around to testing them last night and by golly they are niiiice! The Depos have nothing on these! Granted, the OEMs are an option at a very steep premium.
I did notice that when I start the car, sometimes the lights dance and sometimes they don't - not sure if they're supposed to do their dance every time or if this is due to the error code I have.
Here's some pics
ILS car off
ILS DRL's
ILS low beams



