E550 Offset for 19"
After months of looking, I have finally found the OEM AMG 7-spoke wheels! I would have to get them shipped internationally but before I do so I wanted to ease my mind and confirm if the wheel's offset would be an issue.
The recommended OE offset for those wheels for the E550 4Matic is 8.5J x 19 ET 48 (Front) 9.5J x 19 ET 48 (Rear). However the wheels I am purchasing have the following - 8.5J x 19 ET44 (Front) 9.5J x 19 ET48 (Rear)
Would the front offset of 44 be ok for the E550 4Matic? I am thinking of going with these tire sizes - 245/35 (Front) & 275/30 (Rear). I beleive with this set up the rolling diameter would be .1% of each other.
So ye, I would really appreciate it if somebody can confirm if the above offset and tire sizes would be ok.
Thanks
Did you have any issues with those sizes?
With 285/30/19 at the rear - it is 1.00”
To be honest I’m just happy the offset of 44 is not an issue and I will get my installer to double check the tire sizes before I purchase the Pilotsports
Trending Topics
http://www.mercteil.com/en/products/...s-set-for-c218
Front wheels:
- Size: 9J x 19 ET 37
- Recommended tires: 255/35 R19
- Size: 10J x 19 ET 47
- Recommended tires: 285/30 R19
The Best of Mercedes & AMG
http://www.mercteil.com/en/products/...s-set-for-c218
Front wheels:
- Size: 9J x 19 ET 37
- Recommended tires: 255/35 R19
- Size: 10J x 19 ET 47
- Recommended tires: 285/30 R19
http://www.mercteil.com/en/products/...s-set-for-c218
Front wheels:
- Size: 9J x 19 ET 37
- Recommended tires: 255/35 R19
- Size: 10J x 19 ET 47
- Recommended tires: 285/30 R19
Considering the power these cars have, I was very surprised to see that the stock tire is only 245! I can’t wait to get the staggered set up on my whip.
These are the wheels I’ll be putting on-
Last edited by Buffalo MB; Jun 3, 2018 at 10:52 PM. Reason: Typo
@bigjule
I shall be going with 245/35/19 front and 275/30/19 at the back.
Based on calculator on the site called wheel-size and those sizes are also listed as the OE set up on alloywheels direct site:-










