When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I installed the original kick sensor with original keyless go ecu, not working because need programmed key with keyless function!
i will continue with plant b :-)
i already order aftermarket microwave sensor.
i will update when check
It make sense because all the car cares is that the fob is near you. The kick sensor emulates the open lever under the license plate. On a car without keyless go, the car would have to be unlocked?
Great job, I love this feature as well . It's very useful and handy . Kudos to you as you are able to get it working using 3rd party parts in a Mercedes-Benz
€ 26,31 33% Off | Car One Foot Activated Trunk Boot Kick Sensor Electric Smart Tailgate Kick Switch for Car Trunk Opening Sensor https://a.aliexpress.com/_mtsZNLi
i buy it from here, cheap and works perfectly!
I install a keyless entry-start module to my car.
when i am close to the car automatically the car unloaded and activate the kick sensor.
The car must unlocked to activate kick sensor.
It make sense because all the car cares is that the fob is near you. The kick sensor emulates the open lever under the license plate. On a car without keyless go, the car would have to be unlocked?
yes the car must unlocked, safety reasons. When you buy a keyless entry just kick and the tailgate will open without take out the key ;-)
The way it works from the factory (at least on my 2012) is if all the doors are locked, and you pull on the trunk handle above the license plate, the trunk opens, but the other doors remain closed.
It has 2 buttons on the trunk to close it, a trunk close button, and a lock (the whole car) and trunk close combo button.
The way it works from the factory (at least on my 2012) is if all the doors are locked, and you pull on the trunk handle above the license plate, the trunk opens, but the other doors remain closed.
It has 2 buttons on the trunk to close it, a trunk close button, and a lock (the whole car) and trunk close combo button.
keyless system read the key in your pocket. That means that if you install this cheap aftermarket kick sensor will work
Just make sure that you not need to touch the metal handle and open when you push the button
No just the signal wire
The module needs ground, switch +. Kai memory +
did you attach the signal wire to the trunk release switch outside of the car (above the license plate) or to the trunk close button inside of the car on the trunk lid (see pic)? I cannot get mine to work, but it’s a c43 amg coupe. No trunk open button outside of vehicle
did you attach the signal wire to the trunk release switch outside of the car (above the license plate) or to the trunk close button inside of the car on the trunk lid (see pic)? I cannot get mine to work, but it’s a c43 amg coupe. No trunk open button outside of vehicle
yes you have to find the (open signal) and connect it to the module