Baby Scanner - Launch Creader Elite specific for MB - Bi-directional and more
#77
MBWorld Fanatic!
I am trying to use my Elite 2.0 to diagnose my Airmatic issue (2015 E400 Wagon). Specifically... in the Airmatic special functions, I've been trying to fill struts and/or complete the level calibration (oops). However, the F# function buttons don't seem to do what is advertised... every button push (F1, raise LR; F2, lower LR; F3, raise RR; F4, lower RR) has the effect of *dropping* the left rear!
Now I'm unfortunately stuck in a "not completed" level calibration state, with the left rear tucked, and the car won't air itself up automatically, either (and which I presume also explains an adapative headlights unavailable error message).
Has anyone else experienced this, with the Airmatic, or any other controller, on the Creader?
Now I'm unfortunately stuck in a "not completed" level calibration state, with the left rear tucked, and the car won't air itself up automatically, either (and which I presume also explains an adapative headlights unavailable error message).
Has anyone else experienced this, with the Airmatic, or any other controller, on the Creader?
#78
inspired by this post so it can reduce throttle delay on xentry, I wonder whether something similar is available on the launch. So far I found pedal curve parameter. The default one is 1.5, I change it to 2.3 and wow the throttle response is so much nicer now on my E300. Usually I need to push the pedal harder now not so much,
will be looking for other settings
will be looking for other settings
#80
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,902
Received 1,793 Likes
on
1,324 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
#81
Creader elite
Issue with the above MB reader. System update and now I.have no Benz, sprinter or mayback? Auto detect says software is missing. It continues to download the benz package, installs but still no benz.
Cheers
Cheers
#82
Btw, found the forque limit one and I also have it disabled.
#84
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,902
Received 1,793 Likes
on
1,324 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
#85
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,902
Received 1,793 Likes
on
1,324 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)
not sure I would disable the torque limit without knowing what it does. I think it is an engine protection feature.
The following 2 users liked this post by JettaRed:
CaliBenzDriver (08-29-2024),
tesna (08-29-2024)
#86
MBWorld Fanatic!
iTrader: (1)
Join Date: Nov 2016
Location: Maryland, United States
Posts: 4,902
Received 1,793 Likes
on
1,324 Posts
2015 SL400 (M276 Turbo), 2014 C350 Sport (M276 NA), 2004 SL500 (M113), 2004 Audi TT225 (BEA)