Windshield wiper cowl replacement
If anyone has access to EPC, could they please pull the part number for this? The $5 EPC VM I bought off eBay 2 years ago has stopped working for some reason.
The VIN is WDDHF5FB3EB057429
Also does anyone know if replacing it is a simple DIY job or if it needs to be taken to a shop?
Pictures attached for reference:
I've also been meaning to get the engine mounts and the transmission mount replaced. Can you please pull part numbers for those as well?




Is that because always under the sun since you owned it ?...and if its not from brand new, how bad was it when you first bought the car and when ?
ADD : Once a month I use those plastic protection spray from Meguire to make it not so dull looking
thanks
Is that because always under the sun since you owned it ?...and if its not from brand new, how bad was it when you first bought the car and when ?
ADD : Once a month I use those plastic protection spray from Meguire to make it not so dull looking
thanks
In some places parking outside is the only option, so I have to do it, otherwise I prefer underground or covered parking wherever I can.
Lots of buttons in the interior have started peeling. Window switches, the 'ON' button on the COMAND unit, and the steering wheel controls, which I have replaced with a brand new set. This windshield wiper cowl has completely fallen apart as shown in the pictures. The black rubber trim/seals (not sure what the correct term is), around the windows on all four doors are in extremely poor condition (pic attached for reference).
I took the part number for the windshield wiper cowl that konigstiger shared and asked around, not readily available with anyone so I will have to order it. When it arrives, I will have it replaced whenever the car goes in for its next service.




I got minor peeling on HVAC ON button and power window driver button

Look so el-cheapo
Trending Topics
The Best of Mercedes & AMG


