2014 E350 Serpentine Belt sudden misalignment
#1
2014 E350 Serpentine Belt sudden misalignment
Hey y’all, I noticed the belt on the coolant pump/fan has suddenly become misaligned, slightly protruding forward toward the front bumper (screenshots attached, link to 10 sec video below).
Video URL:
https://drive.google.com/file/d/1aKc38zcqlpGepLjhNjiytJAuwdBMC-Tq/view?usp=drivesdk
After inspecting on multiple occasions, cold start and warm engine:
1) Crankshaft pulley seems to wobble, not excessively (correct me if I am wrong as this might be normal)
2) Idler tensioner also wobbles a tiny amount
3) The pulley which the belt is not sitting properly on doesn’t vibrate at all
Would anyone here be able to tell whether it is the crankshaft causing the belt to move or would it be the tensioner pulley causing this or is it something else? Thank you!
Video URL:
https://drive.google.com/file/d/1aKc38zcqlpGepLjhNjiytJAuwdBMC-Tq/view?usp=drivesdk
After inspecting on multiple occasions, cold start and warm engine:
1) Crankshaft pulley seems to wobble, not excessively (correct me if I am wrong as this might be normal)
2) Idler tensioner also wobbles a tiny amount
3) The pulley which the belt is not sitting properly on doesn’t vibrate at all
Would anyone here be able to tell whether it is the crankshaft causing the belt to move or would it be the tensioner pulley causing this or is it something else? Thank you!
Last edited by Muqixo; 04-24-2024 at 02:17 PM.
#2
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,928
Received 3,651 Likes
on
2,428 Posts
MY'14 W212 M276 3.5NA @60kMi
Really good observation
How about your alternator pulley can you inspect freeplay with belt-off.
The two things that can missalign serpentine belt is where it's coming from and where it's going.
Let me see...
How about your alternator pulley can you inspect freeplay with belt-off.
The two things that can missalign serpentine belt is where it's coming from and where it's going.
Let me see...
#3
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 5,928
Received 3,651 Likes
on
2,428 Posts
MY'14 W212 M276 3.5NA @60kMi
replace belt-kit !!
back from fishing.... you just need a belt kit with the two plastic idlers included.
my belt aligned over pump
genuine plastic idler pulleys
Water pump is located between the ALT and an idler.
As far as engine rotation goes belt is arriving from the idler > Pump > ALT...
The tensioner is built... to require replacement, specially because it won't work well with a fresh belt.
What's your current mileage??
my belt aligned over pump
genuine plastic idler pulleys
Water pump is located between the ALT and an idler.
As far as engine rotation goes belt is arriving from the idler > Pump > ALT...
The tensioner is built... to require replacement, specially because it won't work well with a fresh belt.
What's your current mileage??