Belt Wrap Kit for Supercharged M113 motors
10-13-2013, 01:58 PM
#101
MBWorld Fanatic!
Has anyone data logged the boost pressure before and after mine is like 26 to 27 off of the MAP sensor
10-28-2013, 02:05 PM
#103
PLATINUM SPONSOR
Have a motor out of the car with belt wrap kit and 5pc idler, if anyone needs anymore detailed pictures.
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
11-14-2013, 02:42 PM
#104
Junior Member
Join Date: Mar 2010
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
2003 E55 AMG Carlsson Front Spoiler & Diffuser, 175 ASP Pulley, K&Ns, Resonator delete, 19" SL-65s
Hi Shardul
Can you send me a PM on whether this belt wrap kit will work with my setup. I'm running a 172mm crank pulley and all other stock idler pulleys and belts recently replaced.
Many thanks
desertland
Can you send me a PM on whether this belt wrap kit will work with my setup. I'm running a 172mm crank pulley and all other stock idler pulleys and belts recently replaced.
Many thanks
desertland
11-24-2013, 08:39 PM
#106
Junior Member
Join Date: Apr 2013
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
E55
I come from the Mustang community and bolt-on parts rarely work as advertised, this exceeded my expectations. My only regret is not getting the matching idler, the stock one is UGLY compared to the SC pulley and BWK.
Funny story, my car had 95k when I bought it, about 105k when I installed this and 120k now.
When I bought the car, the SC belt would chirp leaving from a stop and my friend who is a MB tech knew the original owner who would always bring the car in for new belts because he hated the occasional chirp.
I can say the chirp has NOT happened since installing these parts, seems like AMG should have installed this from the factory!
Thanks again.
-J
01-30-2014, 07:09 PM
#110
Super Member
Join Date: Nov 2006
Location: Miami,FL.
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
2017 Charger Hellcat
Got my BWK this week and would like to thank Shardul for his very fast service and great customer service.. I would definitely buy from him again!!
01-30-2014, 08:25 PM
#111
Its about time to replace my belts, maybe I should look into this instead of straight replacement....
02-02-2014, 09:09 AM
#114
MBWorld Fanatic!
Love my BWK !! I don't know if it is placebo effect, but I feel like the car is smoother now...Previously if I had the car in 1st or 2nd gear and was just cruising, the supercharger would engage / disengage roughly...Now the car seems to not buck like it did (which I am guessing means the belt was slipping a bit)...I just had the kit installed, but will do a few logs and see if the boost curve is better than before.
Thanks Shar...
Thanks Shar...
02-09-2014, 09:48 PM
#116
Installed Belt WK yesterday. Definite huge improvement in part throttle drivability. No more bucking in 1st to 2nd!
Also I think its pulling hard enough up top at WOT that the down low grunt almost seems less. But will say, I have always felt this car was a bit weak up top so this might be why.
Excellent quality product, clear instructions, excellent customer service from Shardul!
Also I think its pulling hard enough up top at WOT that the down low grunt almost seems less. But will say, I have always felt this car was a bit weak up top so this might be why.
Excellent quality product, clear instructions, excellent customer service from Shardul!
03-28-2014, 09:42 AM
#120
Senior Member
hi, please pass price here as well. I'm putting on my S/C pulley here soon and am considering this, just don't know what they run.
