rivcal4life

Recently, I dyno'd my car at a local shop in Upland, CA. While speaking to the employees, they told me if I could get at least 10 cars together, they would open the shop up on a Saturday for dyno pulls at a group rate of $50 each.

Each car would get 3-4 pulls depending on modifications. This is a great opportunity to baseline your cars for future modifications. Want to test that ebay chip or exhaust? Want to sell your car? This would be great proof your car is running at factory spec. I spoke to Steve Lemberg today and he told me he recently dyno'd a truck of his at the cost of $100 for 3 pulls.

I am gauging interest, and trying to come up with a workable date for all interested parties. I will be posting this on other forums as well. I will try to read all responses from various boards, but please shoot me an email with your preferred date and vehicle application/mods so I can be certain to write you back once a date is decided.

Details:

Shop is Rage performance in Upland, CA just off the 10 freeway.
Dynojet brand Dyno.
Date must be an upcoming Saturday.
$50 for 3 pulls guaranteed, 4 pending vehicle mods.
A/F ratios included

My email: j.poole88@gmail.com

Thanks guys!
-Justin

mikelin7

i am interested..

rivcal4life

So far we are shooting for the end of sept (25th) or the beginning of Oct. Anyone else care to chime in? I only have about 5 cars maybe. We need more to qualify for group pricing.

SeaCoupe

I am interested, but....I want to do a dyno on a Fiat X1/9. If possible ask if they have a timed rate. I have an adjustable cam sprocket that I want to make two adjustments on.

Dyno one stock cam timing
Dyno two retarded cam timing
Dyno three forward cam timing

I realize I may not fit into this offering, but I'm flexible and hoping for a discount on some dyno time.

Ed

Koru_Kinshi

Interest is building. I'd be down.

rivcal4life

We have set a date: October 23rd. Sorry we put it off so long, it was just way too hot these past few weeks.

First come, first serve unless you pay in advance. If you would like to reserve a spot in line to get the cooler morning air, please Email (ideally) or PM me.

Really hope to see some of you big number AMG guys make it out.

andy_meng1024

I may be able to go.

rivcal4life

Just left the deposit, this is happening! I need at least 9-10 people to show up, or I do not get my deposit back. If you are on the fence, please try and make it out. I would consider it a personal favor if you could make it out.

Thanks guys!

Seacoupe: I did ask about your setup. They normally allow between 10-15 minutes between runs for your car to cool down. If you are able to adjust your timing within that time, you will be peach! If it takes longer to make adjustments, we could schedule you toward the end of the day, so no one has to wait any longer.

rivcal4life

Directions and contact info:

Rage Performance (formerly Whitfield Racing)
8455 Loma Place
Upland, CA. 91786
(909)608-7123

My info:
Justin Poole
(951)750-2507 call or text
J.Poole88@gmail.com

andy_meng1024

Still Oct 23rd, right?

andy_meng1024

Oh and what time does it start and end?

rivcal4life

I will be there around 9am. Cars will be run until the everyone gets a turn. Last time I went, we had maybe 15 cars. I was the last to run and that was around 4pm.

rivcal4life

Just wanted to up this event again. Any other takers?

Posting this again so it's easy to find:

Directions and contact info:

October 23, 2010 - 9:00 AM until every car gets tested.

Rage Performance (formerly Whitfield Racing)
8455 Loma Place
Upland, CA. 91786
(909)608-7123

My info:
Justin Poole
(951)750-2507 call or text
J.Poole88@gmail.com

AMGSC

My friend and I will be there by 11am.

B R

I'm going up to Vegas that morning, I'll be driving right by there so I might stop by for a couple of minutes to check things out.

rivcal4life

Sounds good! I will be there at 9AM sharp. If you would like to run your car, I can schedule things so you will be in and out in half an hour. Just shoot me your number.

If you don't want to run, just watch, then I'll see you there.

B R

That's cool, thanks for the offer, but I'm not taking my SL, I'll be in my Frontier. Maybe I should dyno that .

I do need to get a baseline done on my SL, but I'll have to wait, & I want to find some place closer to me, so it will be more convenient when I go back later with mods.

rivcal4life

Understandably so! Oh well. I hope the turnout does not disappoint.

rivcal4life

For those in attendance, one last small note: Payments will be accepted in Cash or Credit. Credit payments will be subject to a 4% surcharge. No checks.

So, I suggest bringing cash. See you all there!