Just ordered GL350 BT. Now having second thoughts.
Either way, Renntech does have the updated tune for the W166 which uses the same engine as the GL. They Gain 20 hp and 30 lb-ft of torque for $1,295. This is exactly what Kleeman gains too.
I would be very skeptical of the other company that is gaining 60+ Hp and 118 lb-ft of torque for $349 when the others are gaining a fraction of that power. I would want to see an independent dyno before I would trust the claims.
http://www.renntechmercedes.com/www/node/969
240 HP / 455 LB-FT
Gains:
260 HP / 485 LB-FT
Price: $1,295
Eurotuner did a full test of the boxes on a BMW:
http://www.racechip.de/downloads/rac...ck_ansicht.pdf
Either way, Renntech does have the updated tune for the W166 which uses the same engine as the GL. They Gain 20 hp and 30 lb-ft of torque for $1,295. This is exactly what Kleeman gains too.
I would be very skeptical of the other company that is gaining 60+ Hp and 118 lb-ft of torque for $349 when the others are gaining a fraction of that power. I would want to see an independent dyno before I would trust the claims.
http://www.renntechmercedes.com/www/node/969
240 HP / 455 LB-FT
Gains:
260 HP / 485 LB-FT
Price: $1,295
The 2013, coded 166 starts out with 455 kb-ft.
Renntech has no ECU for the new 2013-2014 engine at this time. They can not unlock the ECU at this time.
Other tunners have ECU tuner kits that claim about 20% increase in HP and Torque. Also, there is a mod to decrease the peddle delay when you floor-it off the line.
Last edited by Hammer1; Mar 25, 2014 at 03:34 PM.




The 2013, coded 166 starts out with 455 kb-ft.
Renntech has no ECU for the new 2013-2014 engine at this time. They can not unlock the ECU at this time.
Other tunners have ECU tuner kits that claim about 20% increase in HP and Torque. Also, there is a mod to decrease the peddle delay when you floor-it off the line.
The X166 GL350 makes 240 HP stock and 455 lb-ft of torque stock.
http://www.mbusa.com/mercedes/vehicl...model-GL350BTC
Last edited by BlownV8; Mar 25, 2014 at 10:07 PM.
The 2013, coded 166 starts out with 455 kb-ft.
Renntech has no ECU for the new 2013-2014 engine at this time. They can not unlock the ECU at this time.
Other tunners have ECU tuner kits that claim about 20% increase in HP and Torque. Also, there is a mod to decrease the peddle delay when you floor-it off the line.




My experience with Renntech is that they deliver at or greater than their claims and have a spotless reputation. I can't say that about most other tuners. They traditionally grossly overstate horsepower gains and do not stand by their products when there is a failure.
When I had my ECU and TCU tuned by Renntech on my bi turbo V12, the car would not go in gear. They overnighted a new TCU at their cost. Not only did they cover a brand new TCU but they also covered the shipping. Turns out that I bent one of the prongs reinserting the TCU. I told them it was my fault. They did not ask for a penny more or even that I send the new TCU back to them.
Renntech touted gains of 125 crank HP over stock. My car produced over 125 rwhp over stock. If you know about dynos and HP gains, you know that 125 rwhp is much greater than 125 crank HP. I was a very happy camper with their results and their customer service.
My experience with Renntech is that they deliver at or greater than their claims and have a spotless reputation. I can't say that about most other tuners. They traditionally grossly overstate horsepower gains and do not stand by their products when there is a failure.
When I had my ECU and TCU tuned by Renntech on my bi turbo V12, the car would not go in gear. They overnighted a new TCU at their cost. Not only did they cover a brand new TCU but they also covered the shipping. Turns out that I bent one of the prongs reinserting the TCU. I told them it was my fault. They did not ask for a penny more or even that I send the new TCU back to them.
Renntech touted gains of 125 crank HP over stock. My car produced over 125 rwhp over stock. If you know about dynos and HP gains, you know that 125 rwhp is much greater than 125 crank HP. I was a very happy camper with their results and their customer service.
Pretty solid advice……. On another note completely: They let you drive a sold vehicle that had not been picked up yet???
I bought a new 2011 GL and was not able to pick it up for a week…..if my dealer had let someone take it out on a test drive I would have been highly agitated!
The Best of Mercedes & AMG
The X166 GL350 makes 240 HP stock and 455 lb-ft of torque stock.
http://www.mbusa.com/mercedes/vehicl...model-GL350BTC
Here is one of the emails directly from Renntech:
The later model 2013’s have a new generation ECU that we at this time can not unlock we are working on it. Possibly if you can remove your ECU take a picture of the top and bottom of it I can tell you if it can be done.
Thanks
Russ
Russell Erickson
Product Specialist
1369 N. Killian Drive
Lake Park, FL 33403
Phone: 561-845-7888 x118
Fax: 561-845-6777
rerickson@renntechmercedes.com
www.renntechmercedes.com
As far as other tuners, they do seem to have kits that get torque near 600 lb ft. These numbers make the GL350 quite a great tow vehicle and combined with the milage of the Blutech engine, make the GL350 (for me) the choice for towing, not the full blown 450 or 550. That's all.
Last edited by Hammer1; Mar 27, 2014 at 05:37 PM.




