2015 GL450 code P2279
Thread Starter
Newbie
Joined: Nov 2023
Posts: 4
Likes: 0
2015 GL450
2015 GL450 code P2279
Hey everyone, the check engine light came on tonight and the trouble code was P2279. The read out said intake manifold gasket and pcv. I could not find a pcv valve for the 2015. Any help would be greatly appreciated
Member
Joined: Jun 2018
Posts: 150
Likes: 23
2017 GLS450, 2013 GL450, RIP 2011 GL450 (totalled)
This happened to a family member's GLS with the same engine, and the code kept coming back after clearing. The dealer fixed and I'm not sure what all they replaced - but it did require a repair for what that's worth. I'd search the x166 GLS forum for the code also to see if there's anything helpful.
Out Of Control!!
Joined: Sep 2018
Posts: 14,711
Likes: 4,603
From: unbegrenzt
2017 GLE350 4MATIC
Check the vacuum and breather system. Follow breather lines connected to the intake duct in the front center of the engine. The vacuum pump is at the back of the left/driver's side cylinder head. Trace the breather and vacuum tubes to find loose, cracked or separated hoses.
Last edited by chassis; Nov 14, 2023 at 06:39 PM.
Out Of Control!!
Joined: Apr 2019
Posts: 12,161
Likes: 6,882
From: Silicon Valley
W212 MY'14 M276-3.5NA @75kMi
short straw
Unfortunately the PCV repair job is seriously time consuming as it involves removing the high pressure fuel pump. Best bet may be to deal with your trusted MB specialist for quality parts.
🤞
Trending Topics
Thread Starter
Newbie
Joined: Nov 2023
Posts: 4
Likes: 0
2015 GL450
Check the vacuum and breather system. Follow breather lines connected to the intake duct in the front center of the engine. The vacuum pump is at the back of the left/driver's side cylinder head. Trace the breather and vacuum tubes to find loose, cracked or separated hoses.
More info: I took it to an MB Service center, and they did a diagnostic. They felt like it could be a bad wastegate. I was also getting a p0299 code (low boost pressure on tubro 1). I did a pressure test on the wastegate and they both held 10psi. I also tested the lines they also held 10psi. I have not tested the solenoid yet.
not sure if helps
MB World Stories
The Best of Mercedes & AMG
Dubai Tuner Gives the Mercedes G-Class An Entirely New Look
Verdad Gallardo
Six Gift Ideas Your AMG Loving Dad or Grad Will Cherish
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Super Member
Joined: Jul 2019
Posts: 735
Likes: 298
From: New Orleans
2014 GL450, 1992 W140 300SD, 1993 W140 300SE, 1987 E30 Convertible
Ask them to pull vacuum line for turbo solenoid which goes to vacuum pump and check if it is full of oil. If so there is a check valve on the vacuum pump which goes bad causing problems with boost.
Thread Starter
Newbie
Joined: Nov 2023
Posts: 4
Likes: 0
2015 GL450
