how to reset easy entry-exit
#1
Member
Thread Starter
how to reset easy entry-exit
On my 2022 GLC300 w253 the easy entry-exit stopped working after dealership replaced a blind spot assist sensor.
It is turned on in the menu but does not move the seat back or steering wheel in on stop engine and open door.
Any one know how to reset this?
It is turned on in the menu but does not move the seat back or steering wheel in on stop engine and open door.
Any one know how to reset this?
#2
Member
Thread Starter
Got figured out from another forum.
put car in accessories position 1st push on start.
moved seat to half way of up-down, forward and back
steering wheel about half way up and down, in and out.
turned off car. under front seat un plugged and plugged back in
1 at a time 4 connections to seat control.
restarted car, easy entry/exit works like it should
any bodies guess which thing corrected it, But
better than paying dealership to reset
put car in accessories position 1st push on start.
moved seat to half way of up-down, forward and back
steering wheel about half way up and down, in and out.
turned off car. under front seat un plugged and plugged back in
1 at a time 4 connections to seat control.
restarted car, easy entry/exit works like it should
any bodies guess which thing corrected it, But
better than paying dealership to reset
The following users liked this post:
Tim_P (02-06-2023)
#3
MBWorld Fanatic!
Join Date: Apr 2019
Location: Silicon Valley
Posts: 6,124
Received 3,788 Likes
on
2,518 Posts
MY'14 W212 M276 3.5NA @60kMi
soft-crash tips
Got figured out from another forum.
put car in accessories position 1st push on start.
moved seat to half way of up-down, forward and back
steering wheel about half way up and down, in and out.
turned off car. under front seat un plugged and plugged back in
1 at a time 4 connections to seat control.
restarted car, easy entry/exit works like it should
any bodies guess which thing corrected it, But
better than paying dealership to reset
put car in accessories position 1st push on start.
moved seat to half way of up-down, forward and back
steering wheel about half way up and down, in and out.
turned off car. under front seat un plugged and plugged back in
1 at a time 4 connections to seat control.
restarted car, easy entry/exit works like it should
any bodies guess which thing corrected it, But
better than paying dealership to reset
For everyone else: do not go around your car unplugging live modules and expecting miracles, instead.... :
1-- Buy a $150 scanner to retrieve fault codes and reset issues if necessary.
2-- Use a float charger to keep up battery voltage. Car charging system may not be working well. Check if you have extreme battery drain while driving.
3-- Reboot computers by disconnecting battery. Indulge often in this step for free miracles.
Marginal voltage causes networked modules to become soft crashed until reset. Main targets are SAM's that are always powered 24/7 to wake up all others when needed.
Please don't unplug live systems... SRS airbags connections under seat area.✌️