Has anybody used MBHouse for codes or performance tune. I'm looking at their Intelligent Headlight Control+.
https://www.mbhouse.ca/product/intel...ight-control2/
https://www.mbhouse.ca/product/intel...ight-control2/
Quote:
https://www.mbhouse.ca/product/intel...ight-control2/
i ordered that and changing the blinker interval. Install scheduled this Monday. Been pretty happy thus far.Originally Posted by tomgt3
Has anybody used MBHouse for codes or performance tune. I'm looking at their Intelligent Headlight Control+.https://www.mbhouse.ca/product/intel...ight-control2/
their process is different which I plan to document…
Quote:
I’m currently sitting in my car with my laptop connected to the obd2 reader they sent me (connected via usb). Originally Posted by tomgt3
ChiCubs, How did it go today?
they are using flexihub to push coding for the 3 things I have ordered
1. Adjusting blinker default from 3 to 5 blinks on a tap.
2. Remember last driving mode. It’s got a 4 hour memory so if I’m in S+ and turn the car off to pump gas, it’ll start in S+
3. Eurospec ils+. This is the same upgrade that Vlad sells for those who are familiar with him. Great guy who I may end up getting the lowering item from.
More to come…
Quote:
they are using flexihub to push coding for the 3 things I have ordered
1. Adjusting blinker default from 3 to 5 blinks on a tap.
2. Remember last driving mode. It’s got a 4 hour memory so if I’m in S+ and turn the car off to pump gas, it’ll start in S+
3. Eurospec ils+. This is the same upgrade that Vlad sells for those who are familiar with him. Great guy who I may end up getting the lowering item from.
More to come…
Originally Posted by ChiCubs
I’m currently sitting in my car with my laptop connected to the obd2 reader they sent me (connected via usb).they are using flexihub to push coding for the 3 things I have ordered
1. Adjusting blinker default from 3 to 5 blinks on a tap.
2. Remember last driving mode. It’s got a 4 hour memory so if I’m in S+ and turn the car off to pump gas, it’ll start in S+
3. Eurospec ils+. This is the same upgrade that Vlad sells for those who are familiar with him. Great guy who I may end up getting the lowering item from.
More to come…
neither of my Mac’s worked. They’re working on a solution so standby.
What happened with the install?
FINAL UPDATE: (I live in the US)
I imagine that I was a bit of a guinea pig for them so with that in mind; The problem was with a security block on my Mac. They were able to figure it out and walk me through allowing the connection to work.
All products were installed correctly and are working.
The blinker goes 5 times on a bump now which is nice for lazy lane changes on road trips.
The last driving mode memory is awesome. When I’m in Eco on a long road trip and stop for gas I always forget to put it back in eco. Same with S+ on fun days.
The ILS+ I won’t know until this weekend when I’m out in BFE at night. There’s an option in my menu now that wasn’t previously.
The overall time to complete these was about 2 hours end to end once the security issue was resolved.
I have no complaints and would use them again.
I imagine that I was a bit of a guinea pig for them so with that in mind; The problem was with a security block on my Mac. They were able to figure it out and walk me through allowing the connection to work.
All products were installed correctly and are working.
The blinker goes 5 times on a bump now which is nice for lazy lane changes on road trips.
The last driving mode memory is awesome. When I’m in Eco on a long road trip and stop for gas I always forget to put it back in eco. Same with S+ on fun days.
The ILS+ I won’t know until this weekend when I’m out in BFE at night. There’s an option in my menu now that wasn’t previously.
The overall time to complete these was about 2 hours end to end once the security issue was resolved.
I have no complaints and would use them again.
lanoipat
Senior Member
close
- Join DateMar 2018
- Posts:397
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2010 Audi S4, 2019 GLC 43,07 BMW Z4 M coupe
-
Likes:179
-
Liked:55 Times in 48 Posts
I went on their website and looked at the onboard camera . I would love to see a picture of it mounted on a GLC .
Anyone has it ?
Thanks
Anyone has it ?
Thanks
MB World Stories
The Best of Mercedes & AMG
ExploreQuote:
I imagine that I was a bit of a guinea pig for them so with that in mind; The problem was with a security block on my Mac. They were able to figure it out and walk me through allowing the connection to work.
All products were installed correctly and are working.
The blinker goes 5 times on a bump now which is nice for lazy lane changes on road trips.
The last driving mode memory is awesome. When I’m in Eco on a long road trip and stop for gas I always forget to put it back in eco. Same with S+ on fun days.
The ILS+ I won’t know until this weekend when I’m out in BFE at night. There’s an option in my menu now that wasn’t previously.
The overall time to complete these was about 2 hours end to end once the security issue was resolved.
I have no complaints and would use them again.
NIGHT 1 in BFE. The ILS+ was much improved. I drive a stretch of road that’s rural and dark with some traffic and it performs Far better than the US ILS version. It’s far more active lighting and dimming. It doesn’t work in the city but out here, so much better. Originally Posted by ChiCubs
FINAL UPDATE: (I live in the US)I imagine that I was a bit of a guinea pig for them so with that in mind; The problem was with a security block on my Mac. They were able to figure it out and walk me through allowing the connection to work.
All products were installed correctly and are working.
The blinker goes 5 times on a bump now which is nice for lazy lane changes on road trips.
The last driving mode memory is awesome. When I’m in Eco on a long road trip and stop for gas I always forget to put it back in eco. Same with S+ on fun days.
The ILS+ I won’t know until this weekend when I’m out in BFE at night. There’s an option in my menu now that wasn’t previously.
The overall time to complete these was about 2 hours end to end once the security issue was resolved.
I have no complaints and would use them again.
Member
Quote:
https://www.mbhouse.ca/product/intel...ight-control2/
I’m in Toronto and I’ve talked with them. Seem to understand what they are doing. Originally Posted by tomgt3
Has anybody used MBHouse for codes or performance tune. I'm looking at their Intelligent Headlight Control+.https://www.mbhouse.ca/product/intel...ight-control2/
I just sent you a pm. Let me know if you need anything.
Quote:
I just sent you a pm. Let me know if you need anything.
Thanks for the note. Originally Posted by nateo83
I’m in Toronto and I’ve talked with them. Seem to understand what they are doing.I just sent you a pm. Let me know if you need anything.
I absolutely recommend using MBhouse and am pleased with their ability to remotely install upgrades.
I’m in the process of installing their burble tune. It’s so much more aggressive.
if you are looking to do mods you should check out their site. MBhouse.ca
lanoipat
Senior Member
close
- Join DateMar 2018
- Posts:397
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2010 Audi S4, 2019 GLC 43,07 BMW Z4 M coupe
-
Likes:179
-
Liked:55 Times in 48 Posts
Quote:
I absolutely recommend using MBhouse and am pleased with their ability to remotely install upgrades.
I’m in the process of installing their burble tune. It’s so much more aggressive.
if you are looking to do mods you should check out their site. MBhouse.ca
Look like you did some research on the Buble tune ! Originally Posted by ChiCubs
Thanks for the note.I absolutely recommend using MBhouse and am pleased with their ability to remotely install upgrades.
I’m in the process of installing their burble tune. It’s so much more aggressive.
if you are looking to do mods you should check out their site. MBhouse.ca
I am interested too .
Does it work on sport + only ? Do you need to have a tune from them ? Do you have to keep the ODB tool plug to use it ?
Quote:
I am interested too .
Does it work on sport + only ? Do you need to have a tune from them ? Do you have to keep the ODB tool plug to use it ?
hey Pat,Originally Posted by lanoipat
Look like you did some research on the Buble tune !I am interested too .
Does it work on sport + only ? Do you need to have a tune from them ? Do you have to keep the ODB tool plug to use it ?
It works on all drive modes. The OBD is only to push the code in and then removed after install.
I have a final install coming and will post a video.
definetly worth it!
lanoipat
Senior Member
close
- Join DateMar 2018
- Posts:397
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2010 Audi S4, 2019 GLC 43,07 BMW Z4 M coupe
-
Likes:179
-
Liked:55 Times in 48 Posts
Quote:
It works on all drive modes. The OBD is only to push the code in and then removed after install.
I have a final install coming and will post a video.
definetly worth it!
Looking forward to see your video and your comments !Originally Posted by ChiCubs
hey Pat,It works on all drive modes. The OBD is only to push the code in and then removed after install.
I have a final install coming and will post a video.
definetly worth it!
Thanks
Quote:
Thanks
so I get pops in all drive modes now depending on how hard I push it.Originally Posted by lanoipat
Looking forward to see your video and your comments !Thanks
ive delayed posting because they’re working out why I lost the pops on up shifts. More to come.
lanoipat
Senior Member
close
- Join DateMar 2018
- Posts:397
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2010 Audi S4, 2019 GLC 43,07 BMW Z4 M coupe
-
Likes:179
-
Liked:55 Times in 48 Posts
Quote:
ive delayed posting because they’re working out why I lost the pops on up shifts. More to come.
Thanks . I will prefer the pops on sport or sport + mod only . Originally Posted by ChiCubs
so I get pops in all drive modes now depending on how hard I push it.ive delayed posting because they’re working out why I lost the pops on up shifts. More to come.
marchgroupinc
Super Member
close
- Join DateDec 2013
- LocationSW Ontario Canada
- Posts:628
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2020 GLS580, 2023 Corvette Z06
-
Likes:188
-
Liked:176 Times in 130 Posts
Quote:
ive delayed posting because they’re working out why I lost the pops on up shifts. More to come.
DOriginally Posted by ChiCubs
so I get pops in all drive modes now depending on how hard I push it.ive delayed posting because they’re working out why I lost the pops on up shifts. More to come.
Did they solve your issues?
Quote:
Did they solve your issues?
yes. Pops and bangs on up shifts in S+ Originally Posted by marchgroupinc
DDid they solve your issues?
then I get get pops and bangs depending on diving style in C&S as well.
Newbie
Does anyone know how the IHC+ lighting update from Mbhouse differs from the one I have seem mentioned from ‘Vlad” and appearing on Amazon ? Are they both turning on all we are missing from European spec?
Member
Quote:
they are turning IHC+ as well as the side marker light so that it is legal in Canada. It is a really easy coding toggle if you have Vediamo to just add the side marker to the IHC+. Vlad is probably not doing it as he is used to the ECE standards.Originally Posted by dgs1301
Does anyone know how the IHC+ lighting update from Mbhouse differs from the one I have seem mentioned from ‘Vlad” and appearing on Amazon ? Are they both turning on all we are missing from European spec?
Newbie
@ChiCubs do you happen to have a video specifically of the partial highbeam in action? I also got my ILS+ coded by MBHouse but don't see this properly
Quote:
unfortunately the car was totaled last year. Have a glc63 nowOriginally Posted by slyr_M
@ChiCubs do you happen to have a video specifically of the partial highbeam in action? I also got my ILS+ coded by MBHouse but don't see this properly
Currently Active Users (1)




