I have a 2024 GLE 350. A warning suddenly appeared: "Engine oil level stop, switch off vehicle." I checked and it seemed that the engine oil level was very low. It asked to add 1 quart of oil. However, the next day when I started the vehicle again, the warning disappeared. What could be the reason? By the way, which type of engine oil should I use for my 2024 GLE 350? Thanks.
Open the workshop menu and see what it reports the oil level as. Unlike the normal gauge it will show the level in real time. Add oil to get it back where it should be. The paper or digital manual will tell you what type of oil.
MBWorld God!
W205C43PFL
MBWorld God!
close
- Join DateDec 2019
- Posts:31,734
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
-
Likes:158
-
Liked:6,177 Times in 5,361 Posts
Quote:
Originally Posted by JerryLiao
I have a 2024 GLE 350. A warning suddenly appeared: "Engine oil level stop, switch off vehicle." I checked and it seemed that the engine oil level was very low. It asked to add 1 quart of oil. However, the next day when I started the vehicle again, the warning disappeared. What could be the reason? By the way, which type of engine oil should I use for my 2024 GLE 350? Thanks.
Quote:
Yes, this is the correct way to do it as the oil level gauge available outside of that menu is not precise amounts and rather doctored.Originally Posted by jkaetz
Open the workshop menu and see what it reports the oil level as. Unlike the normal gauge it will show the level in real time. Add oil to get it back where it should be. The paper or digital manual will tell you what type of oil.
M264 uses this oil: https://mbworld.org/forums/glc-class...ing-ready.html
MBWorld God!
W205C43PFL
MBWorld God!
close
- Join DateDec 2019
- Posts:31,734
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
-
Likes:158
-
Liked:6,177 Times in 5,361 Posts
Great, thanks. The problem is resolved. It asked me to fill 1 Qt of oil, there is information about the oil type and other specfication in the manual.
Quote:
Originally Posted by jkaetz
Open the workshop menu and see what it reports the oil level as. Unlike the normal gauge it will show the level in real time. Add oil to get it back where it should be. The paper or digital manual will tell you what type of oil.



