MY NEW PROJEKT! GLK 350 Build!








The Best of Mercedes & AMG












I have a 2009 C350 so I presume it's plug and play.
Can you assist with pin code??
Last edited by Nicholi2007; May 11, 2020 at 05:46 PM.








The LVDS to my current screen is going to need some kind of converter.
I've created a thread on upgrading from to 4.0 to 4.5 NTG to gather info.
Is the juice worth the squeeze?
Last edited by Nicholi2007; May 12, 2020 at 05:23 PM.
Amazing job I have the same GLK 350 from USA i made retrofit rear side I change light bumpper , I change ntg 4.0 an on this moment I change odometer on color .
But I need your help I send you a privet massega
My new odometer is not virgin work but not work odo no have communication witch engine I know must made odometr virgin but how ?
I can sedn you memory from my eprom If you need ?
An howe live only rear tailglight like on the picture below becuse now together witch my taglight light center dipped beam
https://mbworld.org/forums/glk-class...ml#post8178234
I work on DTS monaco , Xentry , K-tag , CGDI tec
Last edited by Marcin Krupa; Oct 13, 2020 at 01:09 PM.


Last edited by capt_paul; Dec 12, 2020 at 01:54 PM.
Jaime from Boston. You might remember me when I was inquiring about Designo seats for my GLK about 2yrs ago. I have the US version GLK. I'd like to convert them from red taillight turn signals and use the amber turn signal socket (PY21W). On my GLK, there's the 7 pin main harness - on pin #6 there a wire connected to it, and it goes to that socket and bulb. I bought new bulbs and tested them to see if it'll work with a 9v battery prior to installation and they work. I put the bulbs on, locked the car, used turn signals and only the top blinker works. How can we program this to have the turn signals go to the 6th pin on the harness? I know the turn signals can be changed from 3 blinks from 1, 2, 3 (default setting), 4 or up to 5 blinks.
I posted this. It shows what each pin/wire does.
GLK350 - US - version - taillight - amber
Are you able to help?
It will look like this (Click on link below). I've drawn and made a diagram of what each does and how it'll look like if I do what you're suggesting. By factory, pin 6 is disabled. Do you know how to code this to enable this? I'd assume it's as similar and easy to changing from 3 blinkers to 4 or 5. I just don't have the software LOL
Chris, this is what you're suggesting - click here to see
I knew it! I knew this involved coding.
++MBKLUE
The only software I have seen so far that's all over youtube, is called vediamo. Plenty of videos of people customizg their cars such as manual DRL's to have all DRL's (bumper DRL and headlight DRL's turn on at simultaneously). Aside from having or needing the vediamo software, you also require some hardware. You need the cables that'll connect to your car (OBD 2 adapter).














